03-11-2012, 12:52 PM
I am M.Mahesh Doing M.Tech In JNTU anantapur i want the documentation related the patient monitoring system using GSM and i had the data related to the micro controller but i need the basic block diagram and the functionality
Abstract :
In spite of the improvement of communication link and despite all progress in advanced communication technologies, there are still very few functioning commercial wireless monitoring systems, which are most off-line, and there are still a number of issues to deal with.
Therefore, there is a strong need for investigating the possibility of design and implementation of an interactive real-time wireless communication system. In our project, a generic real-time wireless communication system was designed and developed for short and long term remote patient-monitoring applying wireless protocol. The primary function of this system is to monitor the temperature and Heart Beat of the Patient and the Data collected by the sensors are sent to the Microcontroller. The Microcontroller transmits the data over the air. Here we are using the GSM modem in order to transmit the information.
From the transmitter the recordings are sent as an SMS to the care taker or the expert which have been given as the recipient. Not only we send the information through GSM module as SMS we also display the readings in the PC where we can record them and also keep a track on his/her previous history. And when the conditions go abnormal then we sense those values and then alarm the people around by blowing the alarm and also sending by sending as urgency SMS.
Abstract :
In spite of the improvement of communication link and despite all progress in advanced communication technologies, there are still very few functioning commercial wireless monitoring systems, which are most off-line, and there are still a number of issues to deal with.
Therefore, there is a strong need for investigating the possibility of design and implementation of an interactive real-time wireless communication system. In our project, a generic real-time wireless communication system was designed and developed for short and long term remote patient-monitoring applying wireless protocol. The primary function of this system is to monitor the temperature and Heart Beat of the Patient and the Data collected by the sensors are sent to the Microcontroller. The Microcontroller transmits the data over the air. Here we are using the GSM modem in order to transmit the information.
From the transmitter the recordings are sent as an SMS to the care taker or the expert which have been given as the recipient. Not only we send the information through GSM module as SMS we also display the readings in the PC where we can record them and also keep a track on his/her previous history. And when the conditions go abnormal then we sense those values and then alarm the people around by blowing the alarm and also sending by sending as urgency SMS.