05-11-2012, 03:42 PM
Electromagnetic Flowmeter
[attachment=38191]
Setting the Standard
Designed specifically to target the diverse applications found in
the supply and treatment of both potable and waste water,
MagMaster sets new levels of accuracy, reliability and low cost
of ownership.
MagMaster's ground-breaking design guarantees long-term
calibration stability, coupled with the wide range of sizes, 15 to
2600mm (0.5 to 102 in.), choice of lining and electrode material
quickly established MagMaster as the de facto industry
standard electromagnetic flow meter.
Class-leading Flow Performance
The combination of sensors with ultra-linear magnetics, proven
technology, signal processing and sensor drive results in
unsurpassed accuracy and an operable flow range of 1500:1.
MagMaster's class-leading performance ensures reliable and
accurate measurement over the widely varying flow rates,
including minimal night flows, which occur in typical water and
waste water systems.
Assured Quality
MagMaster is designed and manufactured in accordance with
international quality procedures (ISO 9001) and all flowmeters
are calibrated on nationally-traceable calibration rigs to provide
the end user with complete assurance of both quality and
performance of the meter.
Calibration Verification
CalMaster is the world's first in situ calibration verification
system. The system allows the calibration of MagMaster
electromagnetic flow meters to be verified without the need for
'wet calibration'. The complex series of tests automatically
performed by CalMaster is completed and a certificate
produced without costly excavation of the sensor or disruption
to the water supply. A complete solution to the regulatory
requirement for routine verification and traceability of
electromagnetic flow meters.
Easy, Low-cost Installation
MagMaster sensors' rugged and robust construction ensure a
long, maintenance-free life under the arduous conditions
experienced in the water and waste water industry. The sensors
are fully submersible, meeting the requirements of IP68
(NEMA6P) enabling installation in flooded chambers or metering
pits.
MagMaster sensors in all sizes are buriable. Installation merely
involves excavating to the underground pipe, fitting the sensor,
cabling back to the transmitter and then backfilling the hole. No
metering chambers or pits are required so the installation is
simple, fast and low cost.
[attachment=38191]
Setting the Standard
Designed specifically to target the diverse applications found in
the supply and treatment of both potable and waste water,
MagMaster sets new levels of accuracy, reliability and low cost
of ownership.
MagMaster's ground-breaking design guarantees long-term
calibration stability, coupled with the wide range of sizes, 15 to
2600mm (0.5 to 102 in.), choice of lining and electrode material
quickly established MagMaster as the de facto industry
standard electromagnetic flow meter.
Class-leading Flow Performance
The combination of sensors with ultra-linear magnetics, proven
technology, signal processing and sensor drive results in
unsurpassed accuracy and an operable flow range of 1500:1.
MagMaster's class-leading performance ensures reliable and
accurate measurement over the widely varying flow rates,
including minimal night flows, which occur in typical water and
waste water systems.
Assured Quality
MagMaster is designed and manufactured in accordance with
international quality procedures (ISO 9001) and all flowmeters
are calibrated on nationally-traceable calibration rigs to provide
the end user with complete assurance of both quality and
performance of the meter.
Calibration Verification
CalMaster is the world's first in situ calibration verification
system. The system allows the calibration of MagMaster
electromagnetic flow meters to be verified without the need for
'wet calibration'. The complex series of tests automatically
performed by CalMaster is completed and a certificate
produced without costly excavation of the sensor or disruption
to the water supply. A complete solution to the regulatory
requirement for routine verification and traceability of
electromagnetic flow meters.
Easy, Low-cost Installation
MagMaster sensors' rugged and robust construction ensure a
long, maintenance-free life under the arduous conditions
experienced in the water and waste water industry. The sensors
are fully submersible, meeting the requirements of IP68
(NEMA6P) enabling installation in flooded chambers or metering
pits.
MagMaster sensors in all sizes are buriable. Installation merely
involves excavating to the underground pipe, fitting the sensor,
cabling back to the transmitter and then backfilling the hole. No
metering chambers or pits are required so the installation is
simple, fast and low cost.