17-11-2012, 05:28 PM
DIGITAL SIGNAL PROCESSING LABORATORY MANUAL
[attachment=40075]
The C6713™ DSK builds on TI's industry
-leading line of low cost, easy-to-use DSP Starter Kit (DSK) development boards. The highperformance
board features the TMS320C6713 floating-point DSP. Capable of performing
1350 million floating-point operations per second (MFLOPS), the C6713 DSP makes the
C6713 DSK the most powerful DSK development board.
The DSK is USB port interfaced platform that allows to efficiently develop and test
applications for the C6713. The DSK consists of a C6713-based printed circuit board that
will serve as a hardware reference design for TI’s customers’ products. With extensive host
PC and target DSP software support, including bundled TI tools, the DSK provides ease-ofuse
and capabilities that are attractive to DSP engineers.
The C6713DSK has the following features:
The 6713 DSK is a low-cost standalone development platform that enables customers to evaluate and develop
applications for the TI C67XX DSP family. The DSK also serves as a hardware reference design for the
TMS320C6713 DSP. Schematics, logic equations and application notes are available to ease hardware
development and reduce time to market.
The DSK uses the 32-bit EMIF for the SDRAM (CE0) and daughtercard expansion interface
(CE2 and CE3). The Flash is attached to CE1 of the EMIF in 8-bit mode.
An on-board AIC23 codec allows the DSP to transmit and receive analog signals. McBSP0 is used for the
codec control interface and McBSP1 is used for data. Analog audio I/O is done through four 3.5mm audio jacks
that correspond to microphone input, line input, line output and headphone output. The codec can select the
microphone or the line input as the active input. The analog output is driven to both the line out (fixed gain) and
headphone (adjustable gain) connectors. McBSP1 can be re-routed to the expansion connectors in software.
A programmable logic device called a CPLD is used to implement glue logic that ties the board components
together. The CPLD has a register based user interface that lets the user configure the board by reading and
writing to the CPLD registers. The registers reside at the midpoint of CE1.
INTRODUCTION TO CODE COMPOSER STUDIO
Code Composer is the DSP industry's first fully integrated development environment (IDE)
with DSP-specific functionality. With a familiar environment liked MS-based C++TM, Code
Composer lets you edit, build, debug, profile and manage projects from a single unified
environment. Other unique features include graphical signal analysis, injection/extraction of
data signals via file I/O, multi-processor debugging, automated testing and customization via
a C-interpretive scripting language and much more.
[attachment=40075]
The C6713™ DSK builds on TI's industry
-leading line of low cost, easy-to-use DSP Starter Kit (DSK) development boards. The highperformance
board features the TMS320C6713 floating-point DSP. Capable of performing
1350 million floating-point operations per second (MFLOPS), the C6713 DSP makes the
C6713 DSK the most powerful DSK development board.
The DSK is USB port interfaced platform that allows to efficiently develop and test
applications for the C6713. The DSK consists of a C6713-based printed circuit board that
will serve as a hardware reference design for TI’s customers’ products. With extensive host
PC and target DSP software support, including bundled TI tools, the DSK provides ease-ofuse
and capabilities that are attractive to DSP engineers.
The C6713DSK has the following features:
The 6713 DSK is a low-cost standalone development platform that enables customers to evaluate and develop
applications for the TI C67XX DSP family. The DSK also serves as a hardware reference design for the
TMS320C6713 DSP. Schematics, logic equations and application notes are available to ease hardware
development and reduce time to market.
The DSK uses the 32-bit EMIF for the SDRAM (CE0) and daughtercard expansion interface
(CE2 and CE3). The Flash is attached to CE1 of the EMIF in 8-bit mode.
An on-board AIC23 codec allows the DSP to transmit and receive analog signals. McBSP0 is used for the
codec control interface and McBSP1 is used for data. Analog audio I/O is done through four 3.5mm audio jacks
that correspond to microphone input, line input, line output and headphone output. The codec can select the
microphone or the line input as the active input. The analog output is driven to both the line out (fixed gain) and
headphone (adjustable gain) connectors. McBSP1 can be re-routed to the expansion connectors in software.
A programmable logic device called a CPLD is used to implement glue logic that ties the board components
together. The CPLD has a register based user interface that lets the user configure the board by reading and
writing to the CPLD registers. The registers reside at the midpoint of CE1.
INTRODUCTION TO CODE COMPOSER STUDIO
Code Composer is the DSP industry's first fully integrated development environment (IDE)
with DSP-specific functionality. With a familiar environment liked MS-based C++TM, Code
Composer lets you edit, build, debug, profile and manage projects from a single unified
environment. Other unique features include graphical signal analysis, injection/extraction of
data signals via file I/O, multi-processor debugging, automated testing and customization via
a C-interpretive scripting language and much more.