Seminar Topics & Project Ideas On Computer Science Electronics Electrical Mechanical Engineering Civil MBA Medicine Nursing Science Physics Mathematics Chemistry ppt pdf doc presentation downloads and Abstract

Full Version: digital jewellery full report
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
[attachment=1679]


DIGITAL JEWELERY
A. MADE POSSIBLE USING WIRELESS COMMUNICATION
1.ABSTRACT:
Mobile computing is beginning to break the chains that tie us to our desks, but many of today's mobile devices can still be a bit awkward to carry around. In the next age of computing, there will be an explosion of computer parts across our bodies, rather than across our desktops. Basically, jewelry adorns the body, and has very little practical purpose. However, researchers are looking to change the way we think about the beads and bobbles we wear. The combination of microcomputer devices and increasing computer power has allowed several companies to begin producing fashion jewelry with embedded intelligence i.e., Digital jewelry. Digital jewelry can best be defined as wireless, wearable computers that allow you to communicate by ways of e-mail, voicemail, and voice communication. This paper enlightens on how various computerized jewelry (like ear-rings, necklace, ring, bracelet, etc.,) will work with mobile embedded intelligence.
It seems that everything we access today is under lock and key. Even the devices we use are protected by passwords. It can be frustrating trying to keep with all of the passwords and keys needed to access any door or computer program. This paper discusses about a new Java-based, computerized ring that will automatically unlock doors and log on to computers.
PAPER SUBMITTED BY
K.GEMINI PRAKASH NETHI RAM PRASAD
¾ B.Tech (ECE) ¾ B.Tech (ECE)
(040)-24120600 (040)-55703130
PHANI RAJ JOSHI
¾ B.Tech (ECE)

GURU NANAK ENGINEERING COLLEGE (GNEC)
IBRAHIMPATNAM”HYDERABAD




DIGITAL JEWELERY
2.INTRODUCTION:
The latest computer craze has been to be able to wear wireless computers. The Computer Fashion Wave, "Digital Jewelry" looks to be the next sizzling fashion trend of the technological wave. The combination of shrinking computer devices and increasing computer power has allowed several companies to begin producing fashion jewelry with embedded intelligence. Todayâ„¢s, manufacturers place millions of transistors on a microchip, which can be used to make small devices that store tons of digital data.. The whole concept behind this is to be able to communicate to others by means of wireless appliances. The other key factor of this concept market is to stay fashionable at the same time.
By the end of the decade, we could be wearing our computers instead of sitting in front of them.
3.WHAT IS DIGITAL JEWELERY? :
Digital jewelry is the fashion jewelry with embedded intelligence. Digital jewelry can help you solve problems like forgotten passwords and security badges. Digital jewelry is a nascent catchphrase for wearable ID devices that contain personal information like passwords, identification, and account information. They have the potential to be all-in-one replacements for your driver™s license, key chain, business cards, credit cards, health insurance card, corporate security badge, and loose cash. They can also solve a common dilemma of today™s wired world “ the forgotten password.
4.DIGITAL JEWELRY AND ITS COMPONENTS:
Soon, cell phones will take a totally new form, appearing to have no form at all. Instead of one single device, cell phones will be broken up into their basic components and packaged as various pieces of digital jewelry. Each piece of jewelry will contain a fraction of the components found in a conventional mobile phone. Together, the digital-jewelry cell phone should work just like a conventional cell phone.
The various components that are inside a cell phone:
Microphone, Receiver, Touch pad, Display, Circuit board, Antenna, and Battery.
IBM has developed a prototype of a cell phone that consists of several pieces of digital jewelry that will work together wirelessly, possibly with Blue tooth wireless technology, to perform the functions of the above components.
FIGURE 1
Cell phones may one day be comprised of digital accessories that
Work together through wireless connections.
Here are the pieces of computerized-jewelry phone and their functions:
¢ Earrings - Speakers embedded into these earrings will be the phone's receiver.
¢ Necklace - Users will talk into the necklace's embedded microphone.
¢ Ring - Perhaps the most interesting piece of the phone, this "magic decoder ring is equipped with light-emitting diodes (LEDs) that flash to indicate an incoming call. It can also be programmed to flash different colors to identify a particular caller or indicate the importance of a call.
¢ Bracelet - Equipped with a video graphics array (VGA) display, this wrist display could also be used as a caller identifier that flashes the name and phone number of the caller.
With a jewelry phone, the keypad and dialing function could be integrated into the bracelet, or else dumped altogether -- it's likely that voice-recognition software will be used to make calls, a capability that is already commonplace in many of today's cell phones. Simply say the name of the person you want to call and the phone will dial that person. IBM is also working on a miniature rechargeable battery to power these components.
FIGURE 2
IBM's magic decoder rings will flash when you get a call.
The same ring that flashes for phone calls could also inform you that e-mail is piling up in your inbox. This flashing alert could also indicate the urgency of the e-mail.
FIGURE 3
the eyepiece above displays images and data received wirelessly from the Communicator's belt module.
The mouse-ring that IBM is developing will use the company's Track Point technology to wirelessly move the cursor on a computer-monitor display. (Track Point is the little button embedded in the keyboard of some laptops). IBM Researchers have transferred TrackPoint technology to a ring, which looks something like a black-pearl ring. On top of the ring is a little black ball that users will swivel to move the cursor, in the same way that the TrackPoint button on a laptop is used.
This Track Point ring will be very valuable when monitors shrink to the size of watch face. In the coming age of ubiquitous computing, displays will no longer be tied to desktops or wall screens. Instead, you'll wear the display like a pair of sunglasses or a bracelet. Researchers are overcoming several obstacles facing these new wearable displays, the most important of which is the readability of information displayed on these tiny devices.
FIGURE 4
Prototype bracelet display developed by IBM
Charmed Technology is already marketing its digital jewelry, including a futuristic-looking eyepiece display. The eyepiece is the display component of the company's Charmed Communicator, a wearable, wireless, broadband-Internet device that can be controlled by voice, pen or handheld keypad. The Communicator can be used as an MP3 player, video player and cell phone. The Communicator runs on the company's Linux-based Nanix operating system.
5.TECHNICAL SPECIFICATIONS OF DIGITAL JEWELRY:
Digital jewelry devices consist of a screen or display for information, most likely consisting of 7-16-segment, or dot matrix LEDs, LCDs, or other technologies such as electroluminescent material (EL) or others, which could become an optional display. So too, an audiovisual or other 'display' could consist of a speaker, a single flashing light, a sensor of some kind (such as a temperature driven EL display), or other informational aesthetic. The display layer sits on a face of the device, which is enclosed in some material such as plastic, metal, crystal, or other material. It has external switches and buttons on its side and a data-port for accessing the programmable electronic circuit inside. A micro controller that is a surface mounted device (SMD) on a printed circuit board (PCB) with resistors ® and capacitors © are the internal 'guts' of the jewelry.
6.DISPLAY TECHNOLOGIES:
The digital jewelry display, for instance, every alphabet and number system has found representation within the electronics realm and 'dot-matrix' (a matrix of single LEDs) is used to display Chinese and Japanese and other character sets, as can the alternative display for LCDs (liquid-crystal-displays) also be used, as often found in watches.
FIGURE 5
Digital Jewelry can be made in many different sizes and shapes with a variety of materials ranging from plastic and metal to rubber and glass. They utilize electromagnetic properties and electronics to display information through a screen or display of some kind. This could range from LED 7-segment, 16-segment, dot matrix, and other programmable LEDs devices to LCDs, OLEDs, and other displays, which are all driven by the self-contained jewelry devices themselves.
7.ELECTROMAGNETIC BEADS:
The closest comparison to this model is that of 'beads' which are strung together to make a custom necklace or bracelet, with interchangeable electromagnetic component systems or devices. One bead may be a capacitor on the inside, and a solar panel on the outside. Another bead may have an internal resistor which feed power into a programmed microcontroller bead which drives an external screen, with other options available in a variety of bead configurations which compose a circuit, including beads with a piezo element, voltage regulator, crystal, or rechargeable battery as part of the modular jewel circuit. The number of data pins on the microcontroller needs to be enough to easily program the display layer plus the switches without overly complex and advanced coding methods

FIGURE 6
8.PROTOTYPES OF DIGITAL JEWELRY:
FIGURE 7
Complete HIOX necklace showing all 26 letters of the Roman alphabet
extended in 4-dimensional space-time. Metal with leather cord.


programmable HIOX ring with 16-segment LED display
FIGURE 8
9.THE JAVA RING:
It seems that everything we access today is under lock and key. Even the devices we use are protected by passwords. It can be frustrating trying to keep with all of the passwords and keys needed to access any door or computer program. Dallas Semiconductor is developing a new Java-based, computerized ring that will automatically unlock doors and log on to computers.
FIGURE 9
The Java Ring can be programmed to give you access to every door and device.

Fig.10.Blue Dot receptor
The Java Ring is a stainless-steel ring, 16-millimeters (0.6 inches) in diameter, which houses a 1-million-transistor processor, called an iButton. The ring has 134 KB of RAM, 32 KB of ROM, a real-time clock and a Java virtual machine, which is a piece of software that recognizes the Java language and translates it for the user's computer system. Digital jewelry, (designed to supplement the personal computer,) will be the evolution in digital technology that makes computer elements entirely compatible with the human form.
Highlights of Java Ring
¢ Runs Java better (plus portions enhance Java Card 2.0)
¢ Careful attention to physical security (rapid zeroization)
¢ Durability to stand up to everyday use
¢ High memory capacity (up to 134K bytes NV SRAM)
¢ Retail connectivity to 250 million existing computers (less if designed-in before manufacturing)
10.CONCLUSION:

The basic idea behind the digital jewelry concept is to have the convenience of wireless, wearable computers while remaining fashionably sound. It is hoped to be marketable soon, however, several bugs remain. Charging capabilities and cost are just a sample of the problems that lurk


FIGURE 11
BIBLIOGRAPHY:
Books:
1.Mobile Communications --Jochen Schiller
2.Bluetooth Connect without Cables--Jennifer Bray and Charles F Sturman
3. Cellular & Mobile Communications-- LEE
Web:
www.IBM.com
www.howstuffworks.com
www.infoworld.com
www.ibutton.com
i want project details abt
AUTOMATIC MEDICINE TRACKING SYSTEM IN HOSPITALS THROUGH RF TECHNOLOGY
digital jewellery full report
[attachment=3727]
[attachment=3855]


DIGITAL JEWELLERY



PRESENTED BY
j.Narayanamma
05k81a0484


INTRODUCTION

In Computer Fashion Wave, "Digital Jewellery" looks to be the next sizzling fashion trend of the technological wave.
The combination of shrinking computer devices and increasing computer power has allowed several companies to begin producing fashion jewellery with embedded intelligence.
By the end of the decade, we could be wearing our computers instead of sitting in front of them.


WHAT IS DIGITAL JEWELLERY

Digital jewellery is the fashion jewelry with embedded intelligence.
Digital jewellery can help you solve problems like forgotten passwords and security badges.
Digital jewellery,will be the evolution in digital technology that makes computer elements entirely compatible with the human form.
They have the potential to be all-in-one replacements for your driverâ„¢s license, key chain, business cards, credit cards, health insurance card, corporate security badge, and loose cash.


DIGITAL JEWELLERY AND ITS COMPONENTS

Soon, cell phones will take a totally new form, appearing to have no form at all.
Instead of one single device, cell phones will be broken up into their basic components and packaged as various pieces of digital jewellery.
The various components that are inside a cell phone: Microphone, Receiver, Touch pad, Display, Circuit board, Antenna, and Battery.

IBM has developed a prototype of a cell phone that consists of several pieces of digital jewellery that will work together wirelessly, possibly with Bluetooth wireless technology¦¦¦¦.


Computerized-jewelry phone and their functions:

Ear rings - Speakers embedded into these earrings will be the phone's receiver.
Necklace - Users will talk into the necklace's embedded microphone.
Ring - Perhaps the most interesting piece of the phone, this "magic decoder ring is equipped with LEDs that flash to indicate an incoming call. It can also be programmed to flash different colors to identify a particular caller or indicate the importance of a call.
Bracelet - Equipped with a video graphics array (VGA) display, this wrist display could also be used as a caller identifier that flashes the name and phone number of the caller.



IBM's magic decoder rings

The same ring that flashes for phone calls could also inform you that e-mail is piling up in your inbox.
This flashing alert could also indicate the urgency of the e-mail.
The mouse-ring that IBM is developing will use the company's Track Point technology to wirelessly move the cursor on a computer-monitor display.
Track Point is the little button embedded in the keyboard of some laptops
IBM Researchers have transferred Track Point technology to a ring, which looks something like a black-pearl ring.
On top of the ball that ring is a little black users will move the cursor, in the same way that the TrackPoint button on a laptop is used.
Displays will no longer be tied to desktops or wall screens. Instead, you'll wear the display like a pair of sunglasses or a bracelet
Prototype bracelet display developed by IBM




TECHNICAL SPECIFICATIONS OF DIGITAL JEWELLERY

Digital jewellery devices consist of a screen or display for information, most likely consisting of 7-16-segment, or dot matrix LEDs, LCDs.
An audio visual or other 'display' could consist of a speaker, a single flashing light, a sensor of some kind


DISPLAY TECHNOLOGIES

The digital jewelry display, for instance, every alphabet and number system has found representation within the electronics realm and 'dot-matrix'
It is used to display Chinese and Japanese and other character sets, as can the alternative display for LCDs (liquid-crystal-displays) also be used, as often found in watches.

Digital Jewellery can be made in many different sizes and shapes with a variety of materials ranging from plastic and metal to rubber and glass.
This could range from LED 7-segment, 16-segment, dot matrix, and other programmable LEDs devices to LCDs, OLEDs, and other displays,



PROTOTYPE OF DIGITAL JEWELLERY

Complete HIOX necklace showing all 26 letters of the Roman alphabet extended in 4-dimensional space-time.


JAVA RING

The Java Ring can be programmed to give you access to every door and device.
The Java Ring is a stainless-steel ring, 16-millimeters (0.6 inches) in diameter, which houses a 1-million-transistor processor, called an iButton.
The ring has 134 KB of RAM, 32 KB of ROM, which is a piece of software that recognizes the Java language and translates it for the user's computer system
Dallas Semiconductor is developing a new Java-based, computerized ring that will automatically unlock doors and
log on to computers.



Blue Dot receptor

The Java Ring is snapped into a reader, called a Blue Dot receptor, to allow communication between a host system and the Java Ring


Highlights of Java Ring

Runs Java better
Careful attention to physical security
Durability to stand up to everyday use
High memory capacity
Retail connectivity to 250 million existing computers


Disadvantages

Charging capabilities and cost are just a sample of the problems


CONCLUSION

The basic idea behind the digital jewellery concept is to have the convenience of wireless, wearable computers while remaining fashionable


References:

1. Mobile Communications --Jochen Schiller
2.Blue tooth Connect without Cables--Jennifer Bray and Charles F Sturman
3. Cellular & Mobile Communications“ LEE


Web:

www.IBM.com
www.howstuffworks.com
THANQ
ANY DOUBTS !



Introduction
What is digital jewellery
Digital jewellery and its components
Computerized-jewelry phone and their functions:
IBM's magic decoder rings
Prototype bracelet display developed by IBM
Technical specifications of digital jewellery
Display technologies
Prototypes of digital jewellery
Complete HIOX necklace
The java ring
Highlights of Java Ring
Conclusion
please send me full report on digital jewellery
Hi,
you can just copy the report posted in the above thread to make your report. The doc files attached can be downloaded by clicking on it.
i want digitaljewellery ppt
please send me the full report of digital jewellery with ppt n report.
[attachment=5777]
This article is presented by:
PONNOJU GOPICHAND
PANKAJ SOOD
DIGITAL JEWELLERY


ABSTRACT
Mobile computing is beginning to break the chains that tie us to our desks, but many of today's mobile devices can still be a bit awkward to carry around. In the next age of computing, there will be an explosion of computer parts across our bodies, rather than across our desktops. Basically, jewelry adorns the body, and has very little practical purpose. However, researchers are looking to change the way we think about the beads and bobbles we wear. The combination of microcomputer devices and increasing computer power has allowed several companies to begin producing fashion jewelry with embedded intelligence i.e., Digital jewelry. Digital jewelry can best be defined as wireless, wearable computers that allow you to communicate by ways of e-mail, voicemail, and voice communication. This paper enlightens on how various computerized jewelry (like ear-rings, necklace, ring, bracelet, etc.,) will work with mobile embedded intelligence. It seems that everything we access today is under lock and key. Even the devices we use are protected by passwords. It can be frustrating trying to keep with all of the passwords and keys needed to access any door or computer program. This paper discusses about a new Java-based, computerized ring that will automatically unlock doors and log on to computers.

2. INTRODUCTION:
The latest computer craze has been to be able to wear wireless computers. The Computer Fashion Wave, "Digital Jewelry" looks to be the next sizzling fashion trend of the technological wave. The combination of shrinking computer devices and increasing computer power has allowed several companies to begin producing fashion jewelry with embedded intelligence. Today’s, manufacturers place millions of transistors on a microchip, which can be used to make small devices that store tons of digital data.. The whole concept behind this is to be able to communicate to others by means of wireless appliances. The other key factor of this concept market is to stay fashionable at the same time.
WHAT IS DIGITAL JEWELLERY?
Digital jewelry is the fashion jewelry with embedded intelligence. “Digital jewelry” can help you solve problems like forgotten passwords and security badges. “Digital jewelry” is a nascent catchphrase for wearable ID devices that contain personal information like passwords, identification, and account information. They have the potential to be all-in-one replacements for your driver’s license, key chain, business cards, credit cards, health insurance card, corporate security badge, and loose cash. They can also solve a common dilemma of today’s wired world – the forgotten password.
[attachment=5794]
This article is presented by:
S. HEERA
P. SINDHURA
III B.Tech., ECEDEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGI NEERING
SRI VENKATESWARA UNIVERSITY COLLEGE OF ENGINEERING
TIRUPATI
DIGITAL JEWELLERY



ABSTRACT:
Mobile computing is beginning to break the chains that tie us to our desks, but many of today's mobile devices can still be a bit awkward to carry around. In the next a ge of computing, there will be an explosion of computer parts across our bodies, rather than across our desktops. Basically, jewellery adorns the body, and has very little practical purpose. The combination of microcomputer devices and increasing computer power has allowed several companies to begin producing fashion jewellery with embedded intelligence i.e., Digital jewelry. Digital jewellery can best be defined as wireless, wearable computers that allow you to communicate by ways of e - mail, voicemail, and voice communication. This paper enlightens on how various computerized jewelry (like ear -rings, necklace, ring, bracelet, etc.,) will work with mobile embedded intelligence. Even the devices we use are protected by passwords. It can be frustrating trying to keep with all of the passwords and keys needed to access any door or computer program. This paper discusses about a new Java-based, computerized ring that will automatically unlock doors and log on to computers.
INTRODUCTION:
The latest computer craze has been to be able to wear wireless computers. The Computer Fashion Wave, "Digital Jewellery" looks to be the next sizzling fashion trend of the technological wave. The combination of shrinking computer devices and increasing computer power has allowed several companies to begin producing fashion jewellery with embedded intelligence. The whole concept behind this is to be able to communicate to others by means of wireless appliances. The other key factor of this concept market is to stay fashionable at the same time.

[attachment=6107]
DIGITAL JEWELERY
A. MADE POSSIBLE USING WIRELESS COMMUNICATION
1.ABSTRACT:
Mobile computing is beginning to break the chains that tie us to our desks, but many of today's mobile devices can still be a bit awkward to carry around. In the next age of computing, there will be an explosion of computer parts across our bodies, rather than across our desktops. Basically, jewelry adorns the body, and has very little practical purpose. However, researchers are looking to change the way we think about the beads and bobbles we wear. The combination of microcomputer devices and increasing computer power has allowed several companies to begin producing fashion jewelry with embedded intelligence i.e., Digital jewelry. Digital jewelry can best be defined as wireless, wearable computers that allow you to communicate by ways of e-mail, voicemail, and voice communication. This paper enlightens on how various computerized jewelry (like ear-rings, necklace, ring, bracelet, etc.,) will work with mobile embedded intelligence.
It seems that everything we access today is under lock and key. Even the devices we use are protected by passwords. It can be frustrating trying to keep with all of the passwords and keys needed to access any door or computer program. This paper discusses about a new Java-based, computerized ring that will automatically unlock doors and log on to computers.
PAPER SUBMITTED BY
K.GEMINI PRAKASH NETHI RAM PRASAD
¾ B.Tech (ECE) ¾ B.Tech (ECE)
(040)-24120600 (040)-55703130
PHANI RAJ JOSHI
¾ B.Tech (ECE)

GURU NANAK ENGINEERING COLLEGE (GNEC)
IBRAHIMPATNAM—HYDERABAD



DIGITAL JEWELERY
A. MADE POSSIBLE USING WIRELESS COMMUNICATION
1.ABSTRACT:
Mobile computing is beginning to break the chains that tie us to our desks, but many of today's mobile devices can still be a bit awkward to carry around. In the next age of computing, there will be an explosion of computer parts across our bodies, rather than across our desktops. Basically, jewelry adorns the body, and has very little practical purpose. However, researchers are looking to change the way we think about the beads and bobbles we wear. The combination of microcomputer devices and increasing computer power has allowed several companies to begin producing fashion jewelry with embedded intelligence i.e., Digital jewelry. Digital jewelry can best be defined as wireless, wearable computers that allow you to communicate by ways of e-mail, voicemail, and voice communication. This paper enlightens on how various computerized jewelry (like ear-rings, necklace, ring, bracelet, etc.,) will work with mobile embedded intelligence.
It seems that everything we access today is under lock and key. Even the devices we use are protected by passwords. It can be frustrating trying to keep with all of the passwords and keys needed to access any door or computer program. This paper discusses about a new Java-based, computerized ring that will automatically unlock doors and log on to computers.
PAPER SUBMITTED BY
K.GEMINI PRAKASH NETHI RAM PRASAD
¾ B.Tech (ECE) ¾ B.Tech (ECE)
(040)-24120600 (040)-55703130
PHANI RAJ JOSHI
¾ B.Tech (ECE)

GURU NANAK ENGINEERING COLLEGE (GNEC)
IBRAHIMPATNAM—HYDERABAD




DIGITAL JEWELERY
2.INTRODUCTION:
The latest computer craze has been to be able to wear wireless computers. The Computer Fashion Wave, "Digital Jewelry" looks to be the next sizzling fashion trend of the technological wave. The combination of shrinking computer devices and increasing computer power has allowed several companies to begin producing fashion jewelry with embedded intelligence. Today’s, manufacturers place millions of transistors on a microchip, which can be used to make small devices that store tons of digital data.. The whole concept behind this is to be able to communicate to others by means of wireless appliances. The other key factor of this concept market is to stay fashionable at the same time.
By the end of the decade, we could be wearing our computers instead of sitting in front of them.
3.WHAT IS DIGITAL JEWELERY? :
Digital jewelry is the fashion jewelry with embedded intelligence. “Digital jewelry” can help you solve problems like forgotten passwords and security badges. “Digital jewelry” is a nascent catchphrase for wearable ID devices that contain personal information like passwords, identification, and account information. They have the potential to be all-in-one replacements for your driver’s license, key chain, business cards, credit cards, health insurance card, corporate security badge, and loose cash. They can also solve a common dilemma of today’s wired world – the forgotten password.
4.DIGITAL JEWELRY AND ITS COMPONENTS:
Soon, cell phones will take a totally new form, appearing to have no form at all. Instead of one single device, cell phones will be broken up into their basic components and packaged as various pieces of digital jewelry. Each piece of jewelry will contain a fraction of the components found in a conventional mobile phone. Together, the digital-jewelry cell phone should work just like a conventional cell phone.
The various components that are inside a cell phone:
Microphone, Receiver, Touch pad, Display, Circuit board, Antenna, and Battery.
IBM has developed a prototype of a cell phone that consists of several pieces of digital jewelry that will work together wirelessly, possibly with Blue tooth wireless technology, to perform the functions of the above components.
FIGURE 1
Cell phones may one day be comprised of digital accessories that
Work together through wireless connections.
Here are the pieces of computerized-jewelry phone and their functions:
• Earrings - Speakers embedded into these earrings will be the phone's receiver.
• Necklace - Users will talk into the necklace's embedded microphone.
• Ring - Perhaps the most interesting piece of the phone, this "magic decoder ring” is equipped with light-emitting diodes (LEDs) that flash to indicate an incoming call. It can also be programmed to flash different colors to identify a particular caller or indicate the importance of a call.
• Bracelet - Equipped with a video graphics array (VGA) display, this wrist display could also be used as a caller identifier that flashes the name and phone number of the caller.
With a jewelry phone, the keypad and dialing function could be integrated into the bracelet, or else dumped altogether -- it's likely that voice-recognition software will be used to make calls, a capability that is already commonplace in many of today's cell phones. Simply say the name of the person you want to call and the phone will dial that person. IBM is also working on a miniature rechargeable battery to power these components.
FIGURE 2
IBM's magic decoder rings will flash when you get a call.
The same ring that flashes for phone calls could also inform you that e-mail is piling up in your inbox. This flashing alert could also indicate the urgency of the e-mail.
FIGURE 3
the eyepiece above displays images and data received wirelessly from the Communicator's belt module.
The mouse-ring that IBM is developing will use the company's Track Point technology to wirelessly move the cursor on a computer-monitor display. (Track Point is the little button embedded in the keyboard of some laptops). IBM Researchers have transferred TrackPoint technology to a ring, which looks something like a black-pearl ring. On top of the ring is a little black ball that users will swivel to move the cursor, in the same way that the TrackPoint button on a laptop is used.
This Track Point ring will be very valuable when monitors shrink to the size of watch face. In the coming age of ubiquitous computing, displays will no longer be tied to desktops or wall screens. Instead, you'll wear the display like a pair of sunglasses or a bracelet. Researchers are overcoming several obstacles facing these new wearable displays, the most important of which is the readability of information displayed on these tiny devices.
FIGURE 4
Prototype bracelet display developed by IBM
Charmed Technology is already marketing its digital jewelry, including a futuristic-looking eyepiece display. The eyepiece is the display component of the company's Charmed Communicator, a wearable, wireless, broadband-Internet device that can be controlled by voice, pen or handheld keypad. The Communicator can be used as an MP3 player, video player and cell phone. The Communicator runs on the company's Linux-based Nanix operating system.
5.TECHNICAL SPECIFICATIONS OF DIGITAL JEWELRY:
Digital jewelry devices consist of a screen or display for information, most likely consisting of 7-16-segment, or dot matrix LEDs, LCDs, or other technologies such as electroluminescent material (EL) or others, which could become an optional display. So too, an audiovisual or other 'display' could consist of a speaker, a single flashing light, a sensor of some kind (such as a temperature driven EL display), or other informational aesthetic. The display layer sits on a face of the device, which is enclosed in some material such as plastic, metal, crystal, or other material. It has external switches and buttons on its side and a data-port for accessing the programmable electronic circuit inside. A micro controller that is a surface mounted device (SMD) on a printed circuit board (PCB) with resistors ® and capacitors © are the internal 'guts' of the jewelry.
6.DISPLAY TECHNOLOGIES:
The digital jewelry display, for instance, every alphabet and number system has found representation within the electronics realm and 'dot-matrix' (a matrix of single LEDs) is used to display Chinese and Japanese and other character sets, as can the alternative display for LCDs (liquid-crystal-displays) also be used, as often found in watches.
FIGURE 5
Digital Jewelry can be made in many different sizes and shapes with a variety of materials ranging from plastic and metal to rubber and glass. They utilize electromagnetic properties and electronics to display information through a screen or display of some kind. This could range from LED 7-segment, 16-segment, dot matrix, and other programmable LEDs devices to LCDs, OLEDs, and other displays, which are all driven by the self-contained jewelry devices themselves.
7.ELECTROMAGNETIC BEADS:
The closest comparison to this model is that of 'beads' which are strung together to make a custom necklace or bracelet, with interchangeable electromagnetic component systems or devices. One bead may be a capacitor on the inside, and a solar panel on the outside. Another bead may have an internal resistor which feed power into a programmed microcontroller bead which drives an external screen, with other options available in a variety of bead configurations which compose a circuit, including beads with a piezo element, voltage regulator, crystal, or rechargeable battery as part of the modular jewel circuit. The number of data pins on the microcontroller needs to be enough to easily program the display layer plus the switches without overly complex and advanced coding methods

FIGURE 6
8.PROTOTYPES OF DIGITAL JEWELRY:
FIGURE 7
Complete HIOX necklace showing all 26 letters of the Roman alphabet
extended in 4-dimensional space-time. Metal with leather cord.


programmable HIOX ring with 16-segment LED display
FIGURE 8
9.THE JAVA RING:
It seems that everything we access today is under lock and key. Even the devices we use are protected by passwords. It can be frustrating trying to keep with all of the passwords and keys needed to access any door or computer program. Dallas Semiconductor is developing a new Java-based, computerized ring that will automatically unlock doors and log on to computers.
FIGURE 9
The Java Ring can be programmed to give you access to every door and device.

Fig.10.Blue Dot receptor
The Java Ring is a stainless-steel ring, 16-millimeters (0.6 inches) in diameter, which houses a 1-million-transistor processor, called an iButton. The ring has 134 KB of RAM, 32 KB of ROM, a real-time clock and a Java virtual machine, which is a piece of software that recognizes the Java language and translates it for the user's computer system. Digital jewelry, (designed to supplement the personal computer,) will be the evolution in digital technology that makes computer elements entirely compatible with the human form.
Highlights of Java Ring
• Runs Java better (plus portions enhance Java Card 2.0)
• Careful attention to physical security (rapid zeroization)
• Durability to stand up to everyday use
• High memory capacity (up to 134K bytes NV SRAM)
• Retail connectivity to 250 million existing computers (less if designed-in before manufacturing)
10.CONCLUSION:

The basic idea behind the digital jewelry concept is to have the convenience of wireless, wearable computers while remaining fashionably sound. It is hoped to be marketable soon, however, several bugs remain. Charging capabilities and cost are just a sample of the problems that lurk


FIGURE 11
BIBLIOGRAPHY:
Books:
1.Mobile Communications --Jochen Schiller
2.Bluetooth Connect without Cables--Jennifer Bray and Charles F Sturman
3. Cellular & Mobile Communications-- LEE
Web:
http://www.IBM.com
http://www.howstuffworks.com
http://www.infoworld.com
http://www.ibutton.com
[attachment=6545]
D I G I T A L J E W E L L E R Y

SUBMITTED BY

JAYAKRISHNAN B S

EC 7A
ROLL NO:25

I N T R O D U C T I O N

"Digital Jewellery" looks to be the next sizzling fashion trend
combination of shrinking computer devices and increasing computer power
concept is to communicate to others by means of wireless appliances

W H A T I S D I G I T A L J E W E L E R Y ?

fashion jewelry with embedded intelligence

contain personal information like passwords, identification, and account information

potential to be all-in-one replacements for your driver’s license, key chain, business cards etc


can u pls tel me detail abt digital jewellery and what are the future enhancements pls









hi
please download the attachments from above posts.you can find more on ' digital jewellery '

how about this digital jewellery i am surprised i need to present seminar on this will you please send me details of it along wit ppt please i need very soon please help me
Pages: 1 2 3