04-12-2012, 05:30 PM
STUDY OF PARALLEL INVERTER
[attachment=42513]
INTRODUCTION:-
“THE DEVICE WHICH CONVERTS DC TO AC AND HAS A COMMUTATING CAPACITOR CONNECTED IN PARALLEL ACROSS LOAD TRANSFORMER IS CALLED PARALLEL INVERTER.”
The basic parallel inverter circuit consist of two thyristors T1 and T2, an inductor L, an output transformer and a commutation capacitor C. The transformer turns ratio from each primary half to secondary winding is assumed unity. The function of L is to make the source current constant.
DESCRIPTION
The 2P4M and 2P6M are a P gate all diffused mold type Thyristor
granted 2 A On-state Average Current (TC = 77°C), with rated voltages
up to 600 V.
FEATURES
• Easy installation by TO-202AA package.
• Less holding current distribution provides free application design.
[attachment=42513]
INTRODUCTION:-
“THE DEVICE WHICH CONVERTS DC TO AC AND HAS A COMMUTATING CAPACITOR CONNECTED IN PARALLEL ACROSS LOAD TRANSFORMER IS CALLED PARALLEL INVERTER.”
The basic parallel inverter circuit consist of two thyristors T1 and T2, an inductor L, an output transformer and a commutation capacitor C. The transformer turns ratio from each primary half to secondary winding is assumed unity. The function of L is to make the source current constant.
DESCRIPTION
The 2P4M and 2P6M are a P gate all diffused mold type Thyristor
granted 2 A On-state Average Current (TC = 77°C), with rated voltages
up to 600 V.
FEATURES
• Easy installation by TO-202AA package.
• Less holding current distribution provides free application design.