26-12-2012, 12:42 PM
4G Technology
[attachment=45251]
ABSTRACT
The fourth generation of mobile networks will truly turn the current mobile phone
networks, in to end to end IP based networks, couple this with the arrival of IPv6, every device in the world will have a unique IP address, which will allow full IP based communications from a mobile device, right to the core of the internet, and back out again. If 4G is implemented correctly, it will truly harmonize global roaming, super high speed connectivity, and transparent end user performance on every mobile communications device in the world. 4G is set to deliver 100mbps to a roaming mobile device globally, and up to 1gbps to a stationary device. With this
in mind, it allows for video conferencing, streaming picture perfect video and much more. It won’t be just the phone networks that need to evolve, the increased traffic load on the internet as a whole (imagine having 1 billion 100mb nodes attached to a network over night) will need to expand, with faster backbones and oceanic links requiring major upgrade. 4G won’t happen overnight, it is estimated that it will be implemented by 2012, and if done correctly, should take off rather quickly. 4G networks i.e. Next Generation Networks (NGNs) are becoming fast and very cost-effective solutions for those wanting an IP built high-speed data capacities in the mobile network. Some possible standards for the 4G system are 802.20, WiMAX (802.16), HSDPA, TDD UMTS, UMTS and future versions of UMTS. The design is that 4G will be based on OFDM (Orthogonal Frequency Division Multiplexing), which is the key enabler of 4G technology. Other technological aspects of 4G are adaptive processing and smart antennas, both of which will be used in 3G networks and enhance rates when used in with OFDM. Currently 3G networks still send their data digitally over a single channel; OFDM is designed to send data over hundreds of parallel streams, thus increasing the amount of information that can be sent at a time over traditional CDMA networks.
INTRODUCTION
4G (also known as Beyond 3G), an abbreviation for Fourth-Generation, is a term used to describe the next complete evolution in wireless communications. A 4G system will be able to provide a comprehensive IP solution where voice, data and streamed multimedia can be given trousers on an "Anytime, Anywhere" basis, and at higher data rates than previous generations.
The approaching 4G (fourth generation) mobile communication systems are projected to solve still-remaining problems of 3G (third generation) systems and to provide a wide variety of new services, from high-quality voice to high-definition video to high-data-rate wireless channels. The term 4G is used broadly to include several types of broadband wireless access communication systems, not only cellular telephone systems. One of the terms used to describe
4G is MAGIC-Mobile multimedia, anytime anywhere, Global mobility support, integrated-wireless solution, and customized personal service. As a promise for the future, 4G systems, that is, cellular broadband wireless access systems have been attracting much interest in the mobile communication arena. The 4G systems not only will support the next generation of mobile service, but also will support the fixed wireless networks. Researchers and vendors are expressing a growing interest in 4G wireless networks that support global roaming across multiple wireless and mobile networks—for example.
HISTORY
At the end of the 1940’s, the first radio telephone service was introduced, and was designed to users in cars to the public land-line based telephone network. Then, in the sixties, a system launched by Bell Systems, called IMTS, or, “Improve d Mobile Telephone Service", brought quite a few improvements such as direct dialing and more bandwidth. The very first analog systems were based upon IMTS and were created in the late 60s and early 70s. The systems were called "cellular" because large coverage areas were split into smaller areas or "cells", each cell is served by a low power transmitter and receiver. The 1G or First Generation was an analog system, and was developed in the seventies, 1G had two major improvements, this was the invention of the microprocessor, and the digital transform of the control link between the phone and the cell site. Advance mobile phone system (AMPS) was first launched by the US and is a 1G mobile system. Based on FDMA, it allows users to make voice calls in 1 country.
2G or Second Generation
2G first appeared around the end of the 1980’s, the 2G system digitized the voice signal, as well as the control link. This new digital system gave a lot better quality and much more capacity (i.e. more people could use their phones at the same time), all at a lower cost to the end consumer. Based on TDMA, the first commercial network for use by the public was the Global system for mobile communication (GSM).
3G or Third Generation
3G systems promise faster communications services, entailing voice, fax and Internet data transfer capabilities, the aim of 3G are to provide these services anytime, anywhere throughout the globe, with seamless roaming between standards. ITU’s IMT-2000 is a global standard for 3G and has opened new doors to enabling innovative services and application for instance, multimedia entertainment, and location-based services, as well as a whole lot more .In 2001,Japan saw the first 3G network launched. 3G technology supports around 144 Kbps, with high speed movement, i.e. in a vehicle. 384Kbps locally, and upto 2Mbps for fixed stations, i.e. in a building.
What is 4G?
Fourth generation (4G) wireless was originally conceived by the Defense Advanced Research Projects Agency (DARPA), the same organization that developed the wired Internet. It is not surprising, then, that DARPA chose the same distributed architecture for the wireless Internet that had proven so successful in the wired Internet. Although experts and policymakers have yet to agree on all the aspects of 4G wireless, two characteristics have emerged as all but certain components of 4G: end-to-end Internet Protocol (IP), and peer-to-peer networking. An all IP network makes sense because consumers will want to use the same data applications they are used to in wired networks. A peer-to-peer network, where every device is both a transceiver and a router/repeater for other devices in the network, eliminates this spoke-and-hub weakness of cellular architectures, because the elimination of a single node does not disable the network. The final definition of “4G” will have to include something as simple as this: if a consumer can do it at home or in the office while wired to the Internet, that consumer must be able to do it wirelessly in a fully mobile environment.
Let’s define “4G” as “wireless ad hoc peer-to-peer networking.” 4G technology is significant because users joining the network add mobile routers to the network infrastructure. Because users carry much of the network with them, network capacity and coverage is dynamically shifted to accommodate changing user patterns. As people congregate and create pockets of high demand, they also create additional routes for each other, thus enabling additional access to network capacity. Users will automatically hop away from congested routes to less congested routes. This permits the network to dynamically and automatically self-balance capacity, and increase network utilization. What may not be obvious is that when user devices act as routers, these devices are actually part of the network infrastructure. So instead of carriers subsidizing the cost of user devices (e.g., handsets, PDAs, of laptop computers), consumers actually subsidize and help deploy the network for the carrier. With a cellular infrastructure, users contribute nothing to the network. They are just consumers competing for resources. But in wireless ad hoc peer-to-peer networks, users cooperate – rather than compete – for network resources.
IMPLEMENTATION USING 4G
The goal of 4G is to replace the current proliferation of core mobile networks with a single worldwide core network standard, based on IP for control, video, packet data, and voice. This will provide uniform video, voice, and data services to the mobile host, based entirely on IP.
The objective is to offer seamless multimedia services to users accessing an all IP-based infrastructure through heterogeneous access technologies. IP is assumed to act as an adhesive for providing global connectivity and mobility among networks.
An all IP-based 4G wireless network has inherent advantages over its predecessors. It is compatible with, and independent of the underlying radio access technology. An IP wireless network replaces the old Signaling
System 7 (SS7) telecommunications protocol, which is considered massively redundant. This is because SS7 signal transmission consumes a larger part of network bandwidth even when there is no signaling traffic for the simple reason that it uses a call setup mechanism to reserve bandwidth, rather time/frequency slots in the radio waves. IP networks, on the other hand, are connectionless and use the slots only when they have data to send. Hence there is optimum usage of the available bandwidth. Today, wireless communications are heavily biased toward voice, even though studies indicate that growth in wireless data traffic is rising exponentially relative to demand for voice traffic. Because an all IP core layer is easily scalable, it is ideally suited to meet this challenge. The goal is a merged data/voice/multimedia network.
Conclusion
As the history of mobile communications shows, attempts have been made to reduce a number of technologies to a single global standard. Projected 4G systems offer this promise of a standard that can be embraced worldwide through its key concept of integration. Future wireless networks will need to support diverse IP multimedia applications to allow sharing of resources among multiple users. There must be a low complexity of implementation and an efficient means of negotiation between the end users and the wireless infrastructure. The fourth generation promises to fulfill the goal of PCC (personal computing and communication)—a vision that affordably provides high data rates everywhere over a wireless network.
Although 4G wireless technology offers higher bit rates and the ability to roam across multiple heterogeneous wireless networks, several issues require further research and development. It is not clear if existing 1G and 2G providers would upgrade to 3G or wait for it to evolve into 4G, completely bypassing 3G. The answer probably lies in the perceived demand for 3G and the ongoing improvement in 2G networks to meet user demands until 4G arrives.
[attachment=45251]
ABSTRACT
The fourth generation of mobile networks will truly turn the current mobile phone
networks, in to end to end IP based networks, couple this with the arrival of IPv6, every device in the world will have a unique IP address, which will allow full IP based communications from a mobile device, right to the core of the internet, and back out again. If 4G is implemented correctly, it will truly harmonize global roaming, super high speed connectivity, and transparent end user performance on every mobile communications device in the world. 4G is set to deliver 100mbps to a roaming mobile device globally, and up to 1gbps to a stationary device. With this
in mind, it allows for video conferencing, streaming picture perfect video and much more. It won’t be just the phone networks that need to evolve, the increased traffic load on the internet as a whole (imagine having 1 billion 100mb nodes attached to a network over night) will need to expand, with faster backbones and oceanic links requiring major upgrade. 4G won’t happen overnight, it is estimated that it will be implemented by 2012, and if done correctly, should take off rather quickly. 4G networks i.e. Next Generation Networks (NGNs) are becoming fast and very cost-effective solutions for those wanting an IP built high-speed data capacities in the mobile network. Some possible standards for the 4G system are 802.20, WiMAX (802.16), HSDPA, TDD UMTS, UMTS and future versions of UMTS. The design is that 4G will be based on OFDM (Orthogonal Frequency Division Multiplexing), which is the key enabler of 4G technology. Other technological aspects of 4G are adaptive processing and smart antennas, both of which will be used in 3G networks and enhance rates when used in with OFDM. Currently 3G networks still send their data digitally over a single channel; OFDM is designed to send data over hundreds of parallel streams, thus increasing the amount of information that can be sent at a time over traditional CDMA networks.
INTRODUCTION
4G (also known as Beyond 3G), an abbreviation for Fourth-Generation, is a term used to describe the next complete evolution in wireless communications. A 4G system will be able to provide a comprehensive IP solution where voice, data and streamed multimedia can be given trousers on an "Anytime, Anywhere" basis, and at higher data rates than previous generations.
The approaching 4G (fourth generation) mobile communication systems are projected to solve still-remaining problems of 3G (third generation) systems and to provide a wide variety of new services, from high-quality voice to high-definition video to high-data-rate wireless channels. The term 4G is used broadly to include several types of broadband wireless access communication systems, not only cellular telephone systems. One of the terms used to describe
4G is MAGIC-Mobile multimedia, anytime anywhere, Global mobility support, integrated-wireless solution, and customized personal service. As a promise for the future, 4G systems, that is, cellular broadband wireless access systems have been attracting much interest in the mobile communication arena. The 4G systems not only will support the next generation of mobile service, but also will support the fixed wireless networks. Researchers and vendors are expressing a growing interest in 4G wireless networks that support global roaming across multiple wireless and mobile networks—for example.
HISTORY
At the end of the 1940’s, the first radio telephone service was introduced, and was designed to users in cars to the public land-line based telephone network. Then, in the sixties, a system launched by Bell Systems, called IMTS, or, “Improve d Mobile Telephone Service", brought quite a few improvements such as direct dialing and more bandwidth. The very first analog systems were based upon IMTS and were created in the late 60s and early 70s. The systems were called "cellular" because large coverage areas were split into smaller areas or "cells", each cell is served by a low power transmitter and receiver. The 1G or First Generation was an analog system, and was developed in the seventies, 1G had two major improvements, this was the invention of the microprocessor, and the digital transform of the control link between the phone and the cell site. Advance mobile phone system (AMPS) was first launched by the US and is a 1G mobile system. Based on FDMA, it allows users to make voice calls in 1 country.
2G or Second Generation
2G first appeared around the end of the 1980’s, the 2G system digitized the voice signal, as well as the control link. This new digital system gave a lot better quality and much more capacity (i.e. more people could use their phones at the same time), all at a lower cost to the end consumer. Based on TDMA, the first commercial network for use by the public was the Global system for mobile communication (GSM).
3G or Third Generation
3G systems promise faster communications services, entailing voice, fax and Internet data transfer capabilities, the aim of 3G are to provide these services anytime, anywhere throughout the globe, with seamless roaming between standards. ITU’s IMT-2000 is a global standard for 3G and has opened new doors to enabling innovative services and application for instance, multimedia entertainment, and location-based services, as well as a whole lot more .In 2001,Japan saw the first 3G network launched. 3G technology supports around 144 Kbps, with high speed movement, i.e. in a vehicle. 384Kbps locally, and upto 2Mbps for fixed stations, i.e. in a building.
What is 4G?
Fourth generation (4G) wireless was originally conceived by the Defense Advanced Research Projects Agency (DARPA), the same organization that developed the wired Internet. It is not surprising, then, that DARPA chose the same distributed architecture for the wireless Internet that had proven so successful in the wired Internet. Although experts and policymakers have yet to agree on all the aspects of 4G wireless, two characteristics have emerged as all but certain components of 4G: end-to-end Internet Protocol (IP), and peer-to-peer networking. An all IP network makes sense because consumers will want to use the same data applications they are used to in wired networks. A peer-to-peer network, where every device is both a transceiver and a router/repeater for other devices in the network, eliminates this spoke-and-hub weakness of cellular architectures, because the elimination of a single node does not disable the network. The final definition of “4G” will have to include something as simple as this: if a consumer can do it at home or in the office while wired to the Internet, that consumer must be able to do it wirelessly in a fully mobile environment.
Let’s define “4G” as “wireless ad hoc peer-to-peer networking.” 4G technology is significant because users joining the network add mobile routers to the network infrastructure. Because users carry much of the network with them, network capacity and coverage is dynamically shifted to accommodate changing user patterns. As people congregate and create pockets of high demand, they also create additional routes for each other, thus enabling additional access to network capacity. Users will automatically hop away from congested routes to less congested routes. This permits the network to dynamically and automatically self-balance capacity, and increase network utilization. What may not be obvious is that when user devices act as routers, these devices are actually part of the network infrastructure. So instead of carriers subsidizing the cost of user devices (e.g., handsets, PDAs, of laptop computers), consumers actually subsidize and help deploy the network for the carrier. With a cellular infrastructure, users contribute nothing to the network. They are just consumers competing for resources. But in wireless ad hoc peer-to-peer networks, users cooperate – rather than compete – for network resources.
IMPLEMENTATION USING 4G
The goal of 4G is to replace the current proliferation of core mobile networks with a single worldwide core network standard, based on IP for control, video, packet data, and voice. This will provide uniform video, voice, and data services to the mobile host, based entirely on IP.
The objective is to offer seamless multimedia services to users accessing an all IP-based infrastructure through heterogeneous access technologies. IP is assumed to act as an adhesive for providing global connectivity and mobility among networks.
An all IP-based 4G wireless network has inherent advantages over its predecessors. It is compatible with, and independent of the underlying radio access technology. An IP wireless network replaces the old Signaling
System 7 (SS7) telecommunications protocol, which is considered massively redundant. This is because SS7 signal transmission consumes a larger part of network bandwidth even when there is no signaling traffic for the simple reason that it uses a call setup mechanism to reserve bandwidth, rather time/frequency slots in the radio waves. IP networks, on the other hand, are connectionless and use the slots only when they have data to send. Hence there is optimum usage of the available bandwidth. Today, wireless communications are heavily biased toward voice, even though studies indicate that growth in wireless data traffic is rising exponentially relative to demand for voice traffic. Because an all IP core layer is easily scalable, it is ideally suited to meet this challenge. The goal is a merged data/voice/multimedia network.
Conclusion
As the history of mobile communications shows, attempts have been made to reduce a number of technologies to a single global standard. Projected 4G systems offer this promise of a standard that can be embraced worldwide through its key concept of integration. Future wireless networks will need to support diverse IP multimedia applications to allow sharing of resources among multiple users. There must be a low complexity of implementation and an efficient means of negotiation between the end users and the wireless infrastructure. The fourth generation promises to fulfill the goal of PCC (personal computing and communication)—a vision that affordably provides high data rates everywhere over a wireless network.
Although 4G wireless technology offers higher bit rates and the ability to roam across multiple heterogeneous wireless networks, several issues require further research and development. It is not clear if existing 1G and 2G providers would upgrade to 3G or wait for it to evolve into 4G, completely bypassing 3G. The answer probably lies in the perceived demand for 3G and the ongoing improvement in 2G networks to meet user demands until 4G arrives.