01-01-2013, 04:45 PM
INFRARED SENSOR
[attachment=46067]
INFRARED SENSOR
An infrared sensor is an electronic device that emits and/or detects infrared radiation in order to sense some aspect of its surroundings
Infrared sensors can measure the heat of an object, as well as detect motion.
Many of these types of sensors only measure infrared radiation, rather than emitting it, and thus are known as passive infrared (PIR) sensors.
SPARKING
Spark and fire detection in industry is an important element in maintaining a safe working environment.
Hazardous areas should be monitored by reliable, fast acting detection, like the Talentum system.
Dual Infrared (IR2), Ultraviolet / Infrared (UV/IR), and Triple-Infrared (IR3) detectors provide exceptional protection, specified for your requirements.
CMOS
complementary metal oxide semiconductor.
Pronounced see-moss, CMOS is a widely used type of semiconductor.
CMOS semiconductors use both NMOS (negative polarity) and PMOS (positive polarity) circuits.
CMOS semiconductors use both NMOS (negative polarity) and PMOS (positive polarity) circuits. Since only one of the circuit types is on at any given time, CMOS chips require less power than chips using just one type of transistor.
PHOTODIODE
Many diodes designed for use specifically as a photodiode will also use a PIN junction rather than the typical junction.
Photo diodes are semi conductor devices responsive to high energy particles and photons.
Photodiodes operate by absorption of charged particles and generate a flow of current in an external circuit, proportional to the incident power.
[attachment=46067]
INFRARED SENSOR
An infrared sensor is an electronic device that emits and/or detects infrared radiation in order to sense some aspect of its surroundings
Infrared sensors can measure the heat of an object, as well as detect motion.
Many of these types of sensors only measure infrared radiation, rather than emitting it, and thus are known as passive infrared (PIR) sensors.
SPARKING
Spark and fire detection in industry is an important element in maintaining a safe working environment.
Hazardous areas should be monitored by reliable, fast acting detection, like the Talentum system.
Dual Infrared (IR2), Ultraviolet / Infrared (UV/IR), and Triple-Infrared (IR3) detectors provide exceptional protection, specified for your requirements.
CMOS
complementary metal oxide semiconductor.
Pronounced see-moss, CMOS is a widely used type of semiconductor.
CMOS semiconductors use both NMOS (negative polarity) and PMOS (positive polarity) circuits.
CMOS semiconductors use both NMOS (negative polarity) and PMOS (positive polarity) circuits. Since only one of the circuit types is on at any given time, CMOS chips require less power than chips using just one type of transistor.
PHOTODIODE
Many diodes designed for use specifically as a photodiode will also use a PIN junction rather than the typical junction.
Photo diodes are semi conductor devices responsive to high energy particles and photons.
Photodiodes operate by absorption of charged particles and generate a flow of current in an external circuit, proportional to the incident power.