25-01-2013, 12:46 PM
DUAL 4-INPUT MULTIPLEXER
[attachment=48428]
INTRODUCTION
The LSTTL/MSI SN54/74LS153 is a very high speed Dual 4-Input
Multiplexer with common select inputs and individual enable inputs for each
section. It can select two bits of data from four sources. The two buffered
outputs present data in the true (non-inverted) form. In addition to multiplexer
operation, the LS153 can generate any two functions of three variables. The
LS153 is fabricated with the Schottky barrier diode process for high speed and
is completely compatible with all Motorola TTL families.
• Multifunction Capability
• Non-Inverting Outputs
• Separate Enable for Each Multiplexer
• Input Clamp Diodes Limit High Speed Termination Effects
FUNCTIONAL DESCRIPTION
The LS153 is a Dual 4-input Multiplexer fabricated with Low
Power, Schottky barrier diode process for high speed. It can
select two bits of data from up to four sources under the control
of the common Select Inputs (S0, S1). The two 4-input multiplexer
circuits have individual active LOW Enables (Ea, Eb)
which can be used to strobe the outputs independently. When
the Enables (Ea, Eb) are HIGH, the corresponding outputs (Za,
Zb) are forced LOW.
The LS153 is the logic implementation of a 2-pole, 4-position
switch, where the position of the switch is determined by
the logic levels supplied to the two Select Inputs. The logic
equations for the outputs are shown below.
[attachment=48428]
INTRODUCTION
The LSTTL/MSI SN54/74LS153 is a very high speed Dual 4-Input
Multiplexer with common select inputs and individual enable inputs for each
section. It can select two bits of data from four sources. The two buffered
outputs present data in the true (non-inverted) form. In addition to multiplexer
operation, the LS153 can generate any two functions of three variables. The
LS153 is fabricated with the Schottky barrier diode process for high speed and
is completely compatible with all Motorola TTL families.
• Multifunction Capability
• Non-Inverting Outputs
• Separate Enable for Each Multiplexer
• Input Clamp Diodes Limit High Speed Termination Effects
FUNCTIONAL DESCRIPTION
The LS153 is a Dual 4-input Multiplexer fabricated with Low
Power, Schottky barrier diode process for high speed. It can
select two bits of data from up to four sources under the control
of the common Select Inputs (S0, S1). The two 4-input multiplexer
circuits have individual active LOW Enables (Ea, Eb)
which can be used to strobe the outputs independently. When
the Enables (Ea, Eb) are HIGH, the corresponding outputs (Za,
Zb) are forced LOW.
The LS153 is the logic implementation of a 2-pole, 4-position
switch, where the position of the switch is determined by
the logic levels supplied to the two Select Inputs. The logic
equations for the outputs are shown below.