04-09-2014, 11:00 AM
AUTOMATIC PNEUMATIC VALCANIZING MACHINE
AUTOMATIC.doc (Size: 198 KB / Downloads: 10)
SYNOPSIS
The technology of pneumatics has gained tremendous importance in the field of workplace rationalization and automation from old-fashioned timber works and coal mines to modern machine shops and space robots. It is therefore important that technicians and engineers should have a good knowledge of pneumatic system, air operated valves and accessories. The air is compressed in an air compressor and from the compressor plant the flow medium is transmitted to the pneumatic cylinder through a well laid pipe line system. To maintain optimum efficiency of pneumatic system, it is of vital importance that pressure drop between generation and consumption of compressed air is kept very low.
INTRODUCTION
This is an era of automation where it is broadly defined as replacement of manual effort by mechanical power in all degrees of automation. The operation remains an essential part of the system although with changing demands on physical input as the degree of mechanization is increased.
ADVANTAGES
Compact size and portable
Easy to move from one place to another place
Operating principle is simple.
Non-skilled person also operate this machine
Time conception is very less when compare to the manual machine
Heating coil temperature is varied one.
Automatic thermostat is used to maintain the particular temperature
The force required to operate this system is low.
DISADVANTAGES
May be the choice of air leakage problems
We need the compressed air
May be the chance of over heating the tube.