25-08-2017, 09:32 PM
green house monitroing& controlling using zigbee technology
green house monitroing& controlling using zigbee technology.docx (Size: 3.3 MB / Downloads: 58)
INTRODUCTION
1.1 EMBEDDED SYSTEMS
Embedded systems are designed to do some specific task, rather than be a general-purpose computer for multiple tasks. Some also have real time performance constraints that must be met, for reason such as safety and usability; others may have low or no performance requirements, allowing the system hardware to be simplified to reduce costs.
An embedded system is not always a separate block - very often it is physically built-in to the device it is controlling. The software written for embedded systems is often called firmware, and is stored in read-only memory or flash convector chips rather than a disk drive. It often runs with limited computer hardware resources: small or no keyboard, screen, and little memory.
Wireless communication has become an important feature for commercial products and a popular research topic within the last ten years. There are now more mobile phone subscriptions than wired-line subscriptions. Lately, one area of commercial interest has been low-cost, low-power, and short-distance wireless communication used for \personal wireless networks." Technology advancements are providing smaller and more cost effective devices for integrating computational processing, wireless communication, and a host of other functionalities. These embedded communications devices will be integrated into applications ranging from homeland security to industry automation and monitoring. They will also enable custom tailored engineering solutions, creating a revolutionary way of disseminating and processing information. With new technologies and devices come new business activities, and the need for employees in these technological areas. Engineers who have knowledge of embedded systems and wireless communications will be in high demand. Unfortunately, there are few adorable environments available for development and classroom use, so students often do not learn about these technologies during hands-on lab exercises. The communication mediums were twisted pair, optical fiber, infrared, and generally wireless radio.
1.1OBJECTIVE OF THE PROJECT:
GREEN HOUSE MONITORING & CONTROLLING USING GSM
Appropriate environmental conditions are necessary for optimum plant growth, improved crop yields, and efficient use of water and other resources. Automating the data acquisition process of the soil conditions and various climatic parameters that govern plant growth allows information to be collected at high frequency with less labor requirements. The existing systems employ PC or SMS-based systems for keeping the user continuously informed of the conditions inside the greenhouse; but are unaffordable, bulky, difficult to maintain and less accepted by the technologically unskilled workers.
The objective of this project is to design a simple, easy to install, microcontroller-based circuit to monitor and record the values of temperature, humidity, soil moisture and sunlight of the natural environment that are continuously modified and controlled in order optimize them to achieve maximum plant growth and yield. The controller used is a low power, cost efficient chip manufactured by ATMEL having 8K bytes of on-chip flash memory. It communicates with the various sensor modules in real-time in order to control the light, aeration and drainage process efficiently inside a greenhouse by actuating a cooler, fogger, dripper and lights respectively according to the necessary condition of the crops. An integrated Liquid crystal display (LCD) is also used for real time display of data acquired from the various sensors and the status of the various devices. Also, the use of easily available components reduces the manufacturing and maintenance costs. The design is quite flexible as the software can be changed any time. It can thus be tailor-made to the specific requirements of the user.
This makes the proposed system to be an economical, portable and a low maintenance solution for greenhouse applications, especially in rural areas and for small scale agriculturists.