02-05-2011, 10:59 AM
Presented by:
THAKUR JONEY
ABBASI AFTAB
MULTI POINT FUEL INJECTION AND BLACK BOX.pptx (Size: 450.83 KB / Downloads: 180)
(MULTI POINT FUEL INJECTION AND BLACK BOX THECNOLOGY)
MPFI AND BBT
Older way of fuel supply to engineCarburetor> Meeting strict emission requirements were difficult.
Multi point fuel injection
Components of MPFI
Air intake system.
Fuel delivery system.
Electronic control system.
Emission control system.
AIR INTAKE SYSTEM
Main components of air intake system are
Air cleaner.
Throttle body.
Idle air control valve.
FUEL DELIVERY SYSTEM
Major components of fuel delivery system are
Fuel pump.
Pressure regulator system.
Injector.
ELECTRONIC CONTROL SYSTEM
Different components of electronic control system are
Fuel injection control system.
Idle speed control system.
Fuel pump control system.
Ignition control system.
Radiator fan control system.
WORKING OF MPFI
EMISSION CONTROL SYSTEM
Main harmful contents in automobile emission.
Reason.
Emission control by the help of MPFI.
SENSORS USED IN MPFI
Manifold absolute pressure sensor(MAPS).
This sensor senses pressure
In manifold and converts
it into voltage
2. Throttle position sensorIt is connected to throttle valve shaftand detects throttleposition.
3. Intake air temperature sensorsenses the temperature of incoming air
4.Engine coolant temperature sensorMeasures engine’s coolant temp. and converts it into change in resistance.
5. Oxygen sensorDetects amount of oxygen in exhaust.
6. Vehicle speed sensorLocated on transmission and detects vehicle speed.
7. Camshaft position sensor
8.Crankshaft position sensorConsist of magnet and coil.And mounted on oil pan.
ADVANTAGES OF MPFI
Uniform A/F mixture.
Better mileage.
Immediate response.
No need to crank engine twice and more.
CONCLUSION
Almost all vehicles in India are changing to the MPFI because of law emissions, improved mileage and drivability since the engine is controlled by micro computer more accurate amount of a/f mixture will be supplied and as a result complete combustion will take place. this leads to effective utilization of fuel supplied and hence low emission level. it reduces wastage of fuel by the use of sensors and other control systems