16-04-2013, 04:32 PM
Written Pole Electric Motor
Written Pole.pptx (Size: 779.66 KB / Downloads: 41)
Introduction
Electric motors are the backbone of an electrified society and electric motors are responsible for two-thirds of all electric energy generated.
The electric distribution system is comprised of three-phase lines for main feeders and heavily congested areas and single-phase lines for laterals and rural areas.
One fundamental problem with single-phase motors is the very high starting current required to get the motor up to speed.
Basic Operation of Electric Motors
A motor that makes one-half turn and then stops is not very useful though. To make the center magnet continue to turn, the poles of the top and bottom magnets must be reversed. This is the advantage of the electromagnet.
The most common type of motor is an induction motor which is based on electromagnetic theory.
In the case of an induction motor, the conductor is the rotor winding and the magnetic field is produced by the stator windings.
Phase Converters
Until the advent of the Written-Pole motor, the only alternative for supplying a large motor load on a single phase supply was to use a phase converter.
A phase converter is a device that allows a three-phase motor to operate on a single-phase supply by electrically adding another phase from the existing single-phase supply.
There are two categories of phase converters
Static
Rotary
History
In the 1990’s, with support from the Electric Power Research Institute (EPRI), the Precise Power Corporation of Bradenton, Florida, developed a new concept in electric motors called the Written Pole® electric motor.
Written-Pole motor, uses an innovative approach of controlling the magnetic field of the motor as the result a motor that has starting current requirements of only about twice the normal running current and, as an added benefit, the motors have efficiencies of 90% or better compared to conventional motors is obtained.
Construction
The total cross sectional area and resistivity of the rotor cage is selected to provide high slip, high power factor starting characteristics.
A continuous layer of permanent magnetic ferrite material (which used in conventional permanent magnet synchronous motors) covers the rotor lamination stack.
The stator of a written-pole motor is very similar to a typical induction motor.
A unique feature of a written-pole motor is the use of a concentrated excitation winding located at one or two points on the stator. This winding is used to maintain the correct pole geometry in the rotor.
Conclusion
The written-pole motor also has performance advantages over a conventional induction motor including low starting current, very high operating efficiency, and excellent power factor.
This motor technology has the additional benefit of being able to ride through brief service interruptions on single-phase power lines.
When compared to the total system costs, written-pole motors are an attractive alternative to convention three phase induction motors.
Written Pole.pptx (Size: 779.66 KB / Downloads: 41)
Introduction
Electric motors are the backbone of an electrified society and electric motors are responsible for two-thirds of all electric energy generated.
The electric distribution system is comprised of three-phase lines for main feeders and heavily congested areas and single-phase lines for laterals and rural areas.
One fundamental problem with single-phase motors is the very high starting current required to get the motor up to speed.
Basic Operation of Electric Motors
A motor that makes one-half turn and then stops is not very useful though. To make the center magnet continue to turn, the poles of the top and bottom magnets must be reversed. This is the advantage of the electromagnet.
The most common type of motor is an induction motor which is based on electromagnetic theory.
In the case of an induction motor, the conductor is the rotor winding and the magnetic field is produced by the stator windings.
Phase Converters
Until the advent of the Written-Pole motor, the only alternative for supplying a large motor load on a single phase supply was to use a phase converter.
A phase converter is a device that allows a three-phase motor to operate on a single-phase supply by electrically adding another phase from the existing single-phase supply.
There are two categories of phase converters
Static
Rotary
History
In the 1990’s, with support from the Electric Power Research Institute (EPRI), the Precise Power Corporation of Bradenton, Florida, developed a new concept in electric motors called the Written Pole® electric motor.
Written-Pole motor, uses an innovative approach of controlling the magnetic field of the motor as the result a motor that has starting current requirements of only about twice the normal running current and, as an added benefit, the motors have efficiencies of 90% or better compared to conventional motors is obtained.
Construction
The total cross sectional area and resistivity of the rotor cage is selected to provide high slip, high power factor starting characteristics.
A continuous layer of permanent magnetic ferrite material (which used in conventional permanent magnet synchronous motors) covers the rotor lamination stack.
The stator of a written-pole motor is very similar to a typical induction motor.
A unique feature of a written-pole motor is the use of a concentrated excitation winding located at one or two points on the stator. This winding is used to maintain the correct pole geometry in the rotor.
Conclusion
The written-pole motor also has performance advantages over a conventional induction motor including low starting current, very high operating efficiency, and excellent power factor.
This motor technology has the additional benefit of being able to ride through brief service interruptions on single-phase power lines.
When compared to the total system costs, written-pole motors are an attractive alternative to convention three phase induction motors.