27-10-2016, 03:44 PM
Most trucks have lug nuts set at around 500 foot pounds of torque. It is very difficult to generate this kind of power alone, even if you have a cheater bar and a sturdy wrench. But with the Cheater Wrench, you can multiply your torque at a 78:1 ratio, meaning you can generate upwards of 5,000 foot pounds of torque! That's easily enough to remove any lug nut from any truck. Other torque multiplier lug nut wrenches are not as powerful and come with weak one year warranties. We are so confident in the Cheater Wrench that we provide a full lifetime warranty. If it breaks removing any lug nut, just send it back and we will replace it. Just remember, you cannot use an impact gun with the Cheater Wrench. Only spin the input shaft with the handle provided to keep your Cheater Wrench working smoothly and removing any hard to break lug nut.
Adjustable Multinut wheel opener is a special purpose tool
made to open/close all the nuts of a wheel in one time with less
effort. Although various methods are used for opening nuts, they
require a lot of effort to open a single nut. The main objective of
work is to develop a single tool with multiple mechanisms,
which can be made use during assembling and dismantling of
wheels in automobiles. It can be successfully used as a standard
tool irrespective of the model of the vehicle. Also it can be used
in assembly line of automobiles, garages, workshops and service
stations.
The main concept of the proposed system is nut fitting &
removing without human help for driving. The heart of the
project and implementation is motor. The components used here
for efficient function of individual blocks are Motor, Nut fitting
arrangement (spanner) and spur gear arrangement. The main
objective of the model is to remove the nuts of a wheel at once
and not one at a time. The principle of the model is the usage of
bevel gear to transmit relative motion to other gears. Generally
bevel gears are used for transmitting power between non parallel
intersecting shafts. So bevel gear arrangement is used for
actuating the four socket spanners at a time. Twelve driven gears
and one pinion gear are used. The cam and follower mechanism
is used for making the project adjustable. For this purpose radial
cam is used because the follower moves in the direction
perpendicular to the cam axis. And spherical face follower is
used because the side thrust and wear is considerably low. The
pinion gear is meshing with four auxiliary gears which are in turn
connected to a gear whose axle containing the socket spanners at
its end. The auxiliary gear connected to a hollow shaft (main
shaft) which is acting as a guide for follower. The other end of
the follower is connected to a bevel gear. A lock nut arrangement
is provided for connecting the main shaft to follower at any
desired position.
Adjustable Multinut wheel opener is a special purpose tool
made to open/close all the nuts of a wheel in one time with less
effort. Although various methods are used for opening nuts, they
require a lot of effort to open a single nut. The main objective of
work is to develop a single tool with multiple mechanisms,
which can be made use during assembling and dismantling of
wheels in automobiles. It can be successfully used as a standard
tool irrespective of the model of the vehicle. Also it can be used
in assembly line of automobiles, garages, workshops and service
stations.
The main concept of the proposed system is nut fitting &
removing without human help for driving. The heart of the
project and implementation is motor. The components used here
for efficient function of individual blocks are Motor, Nut fitting
arrangement (spanner) and spur gear arrangement. The main
objective of the model is to remove the nuts of a wheel at once
and not one at a time. The principle of the model is the usage of
bevel gear to transmit relative motion to other gears. Generally
bevel gears are used for transmitting power between non parallel
intersecting shafts. So bevel gear arrangement is used for
actuating the four socket spanners at a time. Twelve driven gears
and one pinion gear are used. The cam and follower mechanism
is used for making the project adjustable. For this purpose radial
cam is used because the follower moves in the direction
perpendicular to the cam axis. And spherical face follower is
used because the side thrust and wear is considerably low. The
pinion gear is meshing with four auxiliary gears which are in turn
connected to a gear whose axle containing the socket spanners at
its end. The auxiliary gear connected to a hollow shaft (main
shaft) which is acting as a guide for follower. The other end of
the follower is connected to a bevel gear. A lock nut arrangement
is provided for connecting the main shaft to follower at any
desired position.