04-02-2017, 11:46 AM
ABSTRACT
The main objective of the project is to detect the elevation of the water level in a river before the railroad track at a reasonable distance from the railway and Martina to the nearest master station to stop the train movement. The sensor will send an alarm to the micro controller indicating that it has crossed the danger point.
INTRODUCTION
In today's world, electronic equipment plays a very important role, for safety and accidents. The device operates by processor and sensors to control the train. We are designing this type of rail system to detect the rising water level in a river and intimate it to the nearest master station to stop the train movement. Going to They help show the length and latitude of the trains. It is a system that can prevent serious accidents in sensitive areas.
WORKING
The proposed system detects the possibility of occurrence of sudden flood through the railway track (s)By detecting the level of water in the rivers at a considerable distance from the roads or roads to alert the competent authorities by SMS. The proposed system uses an 8051 family microcontroller and a rectified power supply. In this system, A GSM modem is connected to the microcontroller via a level shifter for communication. The Flash Food Sensor is connected to the microcontroller to detect the water level. Whenever a user presses a button, it is used instead of the rising water level to create a fault at a considerable level Distance from the respective track or road, the information is sent to the microcontroller via logic of the transistor. The microcontroller compares this information with the predefined data; if the information and then send the corresponding information by SMS to the respective authorities through a GSM system modem. The microcontroller stores the mobile number. Thus, many lives and properties can be saved by this alarm system. The future scope of this project can be increased by adding a very special feature of changing storage Telephone number according to user's requirement. This can be achieved by interconnecting an EEPROM With a numeric keypad to the microcontroller to store the desired contact number.
The main objective of the project is to detect the elevation of the water level in a river before the railroad track at a reasonable distance from the railway and Martina to the nearest master station to stop the train movement. The sensor will send an alarm to the micro controller indicating that it has crossed the danger point.
INTRODUCTION
In today's world, electronic equipment plays a very important role, for safety and accidents. The device operates by processor and sensors to control the train. We are designing this type of rail system to detect the rising water level in a river and intimate it to the nearest master station to stop the train movement. Going to They help show the length and latitude of the trains. It is a system that can prevent serious accidents in sensitive areas.
WORKING
The proposed system detects the possibility of occurrence of sudden flood through the railway track (s)By detecting the level of water in the rivers at a considerable distance from the roads or roads to alert the competent authorities by SMS. The proposed system uses an 8051 family microcontroller and a rectified power supply. In this system, A GSM modem is connected to the microcontroller via a level shifter for communication. The Flash Food Sensor is connected to the microcontroller to detect the water level. Whenever a user presses a button, it is used instead of the rising water level to create a fault at a considerable level Distance from the respective track or road, the information is sent to the microcontroller via logic of the transistor. The microcontroller compares this information with the predefined data; if the information and then send the corresponding information by SMS to the respective authorities through a GSM system modem. The microcontroller stores the mobile number. Thus, many lives and properties can be saved by this alarm system. The future scope of this project can be increased by adding a very special feature of changing storage Telephone number according to user's requirement. This can be achieved by interconnecting an EEPROM With a numeric keypad to the microcontroller to store the desired contact number.