30-08-2017, 01:21 PM
Six-channel vibration gauge and analyzer meets the requirements of ISO 8041: 2005 and is an ideal choice for measurements according to ISO 2631-1,2 and 5, ISO 5349 and Directive 2002/44 / CE of the European Parliament. This revolutionary pocket instrument allows simultaneous measurements with two triaxial accelerometers (for example, vibration measurements of both hands or triaxial SEAT transmission are possible).
With this instrument the RMS, Peak, Peak-Peak, VDV, MTVV or dose results such as A (8) and AEQ with all weighting filters required for human vibration measurements, including band-limiting filters, are available. Using the computational power of its digital signal processor, the SV 106A can perform real-time analysis of 1/1 or 1/3 octave simultaneously to meter mode. Advanced time-history recording and time-domain signal recording (according to ISO 2631-5) to the microSD flash card provide a large data input for detailed signal analysis. The results can be easily downloaded to the PC using the USB interface. The instrument works with Svantek's "Supervisor" health and safety software package, as well as the complete SVAN PC ++ analysis package.
The measurement of the vibration of the whole body is easier thanks to the seat-accelerometer of the SV 38V that can be placed directly in the cushion of the seat, floor or fixed to the back of the seat. The SV 105B set with triaxial accelerometer allows measurements of hand-arm vibration regardless of the type of tool evaluated.
With this instrument the RMS, Peak, Peak-Peak, VDV, MTVV or dose results such as A (8) and AEQ with all weighting filters required for human vibration measurements, including band-limiting filters, are available. Using the computational power of its digital signal processor, the SV 106A can perform real-time analysis of 1/1 or 1/3 octave simultaneously to meter mode. Advanced time-history recording and time-domain signal recording (according to ISO 2631-5) to the microSD flash card provide a large data input for detailed signal analysis. The results can be easily downloaded to the PC using the USB interface. The instrument works with Svantek's "Supervisor" health and safety software package, as well as the complete SVAN PC ++ analysis package.
The measurement of the vibration of the whole body is easier thanks to the seat-accelerometer of the SV 38V that can be placed directly in the cushion of the seat, floor or fixed to the back of the seat. The SV 105B set with triaxial accelerometer allows measurements of hand-arm vibration regardless of the type of tool evaluated.