25-08-2017, 09:32 PM
TESTING OF BOARD LEDs
TESTING OF BOARD LEDs.doc (Size: 46 KB / Downloads: 32)
AIM:
To study the FPGA board and testing on board LEDs and switches using verilog codes.
APPARATUS REQUIRED:
• XILLINX ISE 9.2i software
• PC with Windows-XP
• FPGA board (SPARTAN-3E kit)
ALGORITHM:
• Create a verilog file.
• Assign port names.
• Write verilog program.
• Check syntax.
• Create UCF file.
• Assign package pin.
• Connect the Spartan 3E kit using JTag port and configure the device.
• Check on the shift and select program to download the program to FPGA.
• After the program is downloaded check the output using switches and LED.
THEORY:
Spartan-3E kit has 16 switches which are used to give digital input
It has 16 LEDs which are used to display the output of our program
Each and every switch and LED has its own pin location
RESULT:
Thus the FPGA board is studied and board LEDs and switches using verilog codes is tested.