14-10-2017, 10:00 AM
A solar panel connected to an electric arc saw is considered a solar-powered electric saw in which the energy of the sun is used to power the saw for cutting wood, metal rod, etc. A solar connected to the electric saw converts the solar energy into electrical energy that is stored in a 12 V battery as a direct current to run the motor connected to the metal saw. A DC motor is connected to the metal saw that is used to give the rotary motion to the steering wheel connected to the dc motor shaft. The energy stored in the battery is supplied to the DC motor which rotates the flywheel connected to the motor shaft. The rotating movement of the flywheel becomes an alternate movement that gives a backward movement to the saw of the saw by means of a mechanism known as an alternative mechanism. The reciprocating motion of the metal saw alternates the blade in the workpiece that performs the cutting action. The workpiece is held in a clamp for repair. The clamp is made of cast iron or mild steel. A solar powered electric saw is an inexpensive and environmentally friendly device that works without the consumption of any energy other than solar energy. Solar energy is cheap and readily available on land. No heavy machinery or devices are required for energy conservation. SOLAR WOOD CLOSURE SOLAR can be used in workshops, industries and many fields where there is a need for sawing metals.
It can be understood in the following video:
It can be understood in the following video: