13-06-2012, 04:16 PM
CDMA(CODE DIVISION MUTIPLE ACCESS)
CDMA.docx (Size: 101.72 KB / Downloads: 40)
Code division multiple access (CDMA) is a channel access method used by various radio communication technologies. It should not be confused with the mobile phone standards called cdmaOne, CDMA2000 (the 3G evolution of cdmaOne) and WCDMA (the 3G standard used by GSM carriers), which are often referred to as simply CDMA, and use CDMA as an underlying channel access method.
One of the concepts in data communication is the idea of allowing several transmitters to send information simultaneously over a single communication channel. This allows several users to share a band of frequencies (see bandwidth). This concept is called multiple access. CDMA employs spread-spectrum technology and a special coding scheme (where each transmitter is assigned a code) to allow multiple users to be multiplexed over the same physical channel. By contrast, time division multiple access (TDMA) divides access by time, while frequency-division multiple access (FDMA) divides it by frequency. CDMA is a form of spread-spectrum signalling, since the modulated coded signal has a much higher data bandwidth than the data being communicated.
An analogy to the problem of multiple access is a room (channel) in which people wish to talk to each other simultaneously. To avoid confusion, people could take turns speaking (time division), speak at different pitches (frequency division), or speak in different languages (code division). CDMA is analogous to the last example where people speaking the same language can understand each other, but other languages are perceived as noise and rejected. Similarly, in radio CDMA, each group of users is given a shared code. Many codes occupy the same channel, but only users associated with a particular code can communicate.
The technology of code division multiple access channels has long been known. In the USSR, the first work devoted to this subject was published in 1935 by professor D.V. Ageev.[1] It was shown that through the use of linear methods, there are three types of signal separation: frequency, time and compensatory. The technology of CDMA was used in 1957, when the young military radio engineer Leonid Kupriyanovich in Moscow, made an experimental model of a wearable automatic mobile phone, called LK-1 by him, with a base station. LK-1 has a weight of 3 kg, 20-30 km operating distance, and 20-30 hours of battery life.[2][3] The base station, as described by the author, could serve several customers. In 1958, Kupriyanovich made the new experimental "pocket" model of mobile phone. This phone weighed 0.5 kg. To serve more customers, Kupriyanovich proposed the device, named by him as correllator.[4][5] In 1958, the USSR also started the development of the "Altay" national civil mobile phone service for cars, based on the Soviet MRT-1327 standard. The main developers of the Altay system were VNIIS (Voronezh Science Research Institute of Communications) and GSPI (State Specialized Project Institute). In 1963 this service started in Moscow and in 1970 Altay service was used in 30 USSR cities.[citation needed]
FRQUENCY MODULATION
In telecommunications and signal processing, frequency modulation (FM) conveys information over a carrier wave by varying its instantaneous frequency. This contrasts with amplitude modulation, in which the amplitude of the carrier is varied while its frequency remains constant. In analog applications, the difference between the instantaneous and the base frequency of the carrier is directly proportional to the instantaneous value of the input-signal amplitude. Digital data can be sent by shifting the carrier's frequency among a range of settings, a technique known as frequency-shift keying. FSK (digital FM) is widely used in data and fax modems. Morse code transmission has been sent this way, and FASK was used in early telephone-line modems.[1] Radioteletype also uses FSK.[2] FM modulation is also used in telemetry, radar, seismic prospecting and newborn EEG seizure monitoring.[3] Frequency modulation is known as phase modulation when the carrier phase modulation is the time integral of the FM signal. FM is widely used for broadcasting music and speech, two-way radio systems, magnetic tape-recording systems and some video-transmission systems. In radio systems, frequency modulation with sufficient bandwidth provides an advantage in cancelling naturally-occurring noise.
FDM(FREQUENCY DIVISION MULTIPLEXING)
Frequency-division multiplexing (FDM) is a form of signal multiplexing which involves assigning non-overlapping frequency ranges to different signals or to each "user" of a medium.
For long distance telephone connections, 20th century telephone companies used L-carrier and similar co-axial cable systems carrying thousands of voice circuits multiplexed in multiple stages by channel banks.
For shorter distances, cheaper balanced pair cables were used for various systems including Bell System K- and N-Carrier. Those cables didn't allow such large bandwidths, so only 12 voice channels (Double Sideband) and later 24 (Single Sideband) were multiplexed into four wires, one pair for each direction with repeaters every several miles, approximately 10 km. See 12-channel carrier system. By the end of the 20th Century, FDM voice circuits had become rare. Modern telephone systems employ digital transmission, in which time-division multiplexing (TDM) is used instead of FDM.
Since the late 20th century Digital Subscriber Lines have used a Discrete multitone (DMT) system to divide their spectrum into frequency channels.
The concept corresponding to frequency-div
ision multiplexing in the optical domain is known as wavelength division multiplexing.
[edit] Group and supergroup
TDM(TIME DIVISION MULTIPLEXING)
Time-division multiplexing (TDM) is a type of digital (or rarely analog) multiplexing in which two or more bit streams or signals are transferred apparently simultaneously as sub-channels in one communication channel, but are physically taking turns on the channel. The time domain is divided into several recurrent time slots of fixed length, one for each sub-channel. A sample byte or data block of sub-channel 1 is transmitted during time slot 1, sub-channel 2 during time slot 2, etc. One TDM frame consists of one time slot per sub-channel plus a synchronization channel and sometimes error correction channel before the synchronization. After the last sub-channel, error correction, and synchronization, the cycle starts all over again with a new frame, starting with the second sample, byte or data block from sub-channel 1, etc.