31-08-2017, 03:53 PM
OPERATING PRINCIPLE:
Here we have two pneumatic cylinder mechanisms which are arranged on either side of the footrest of the vehicle to apply the gear. The pneumatic cylinder is attached to the end of the flat pedal. The rest of the plate has a pivot in the center. The cylinders operate with the help of the power supply and are controlled by the control unit. One of the cylinders is used to apply the gear and another to reduce the gears. The gears are applied to the vehicle depending on the speed of the vehicle. The speed sensors are placed near the wheel, the sensor detects the signal and gives the output signal to the control unit. For this purpose, we are using a belt motor with a U-slot sensor in such a way that the speed can be varied through the belt motor. Depending on the signal, the clutch and gears will change automatically with the help of the control unit. When the speed of the vehicle automatically increases the clutch and the change of speeds in the vehicles. The layout is clearly shown in the diagram below.
Two-wheel automatic gear changer pneumatic model
Here we have two pneumatic cylinder mechanisms which are arranged on either side of the footrest of the vehicle to apply the gear. The pneumatic cylinder is attached to the end of the flat pedal. The rest of the plate has a pivot in the center. The cylinders operate with the help of the power supply and are controlled by the control unit. One of the cylinders is used to apply the gear and another to reduce the gears. The gears are applied to the vehicle depending on the speed of the vehicle. The speed sensors are placed near the wheel, the sensor detects the signal and gives the output signal to the control unit. For this purpose, we are using a belt motor with a U-slot sensor in such a way that the speed can be varied through the belt motor. Depending on the signal, the clutch and gears will change automatically with the help of the control unit. When the speed of the vehicle automatically increases the clutch and the change of speeds in the vehicles. The layout is clearly shown in the diagram below.
Two-wheel automatic gear changer pneumatic model