01-08-2016, 04:30 PM
Scope of work: In TXM Winding section Tig welding/Brazing
work is to be carried out which includes
a) Tig welding of D.C armatures .
b) Brazing work of ABB 6FRA, 6FXA, DMKT & Siemens stators.
The work also involves Loading/unloading of jobs which is to be
done by the party itself.
The above work should meet the requirement of the shop
executive/supervisor. The contractor shall supervise all operations
done by their employees. Party should have experience in doing
similar kind of work.
The above work shall be normally done in 1st & 2nd shift. Work
shall also be done in 3rd shift and on Sunday/Holidays as and
when required.
Price: Rate per job for every work(Tig welding of D.Carmatures,
Brazing work of ABB 6FRA, 6FXA, DMKT & Siemens
stators.)shall be quoted.In addition to the operators to
perform the operations, contractor will have to provide one
supervisor to supervise all operations. Party has to mention
total amount also.Total amount will be taken for L1
calculation (In case of discrepancy the value in words will be
considered).
Party should have experience in doing similar kind of work.
Period: Period of completion of work shall be from the date of
placement of order to 31/03/2011.
EMD: Earnest Money is to be paid by each tenderer to ensure
that The
tenderer does not refuse to execute the work after it
is awarded
to him. The rate of earnest money deposit shall be as
under:
- Works costing up to Rs. 2 lakhs
Nil
- Works costing more than Rs. 2 lakhs and up to Rs. 5 lakhs
: Rs.10, 000/-
- Works costing more than Rs. 5 lakhs and up to Rs. 10
lakhs : Rs.20,000/-
- Works costing more than Rs.10 lakhs and up to Rs. 20
lakhs : Rs.40,000/-
- Works costing more than Rs.20 lakhs and up to Rs. 30
lakhs : Rs.60,000/-
- Works costing more than Rs.30 lakhs and up to Rs. 50
lakhs : Rs1, 00,000/-
- Works costing more than Rs.50 lakhs and up to Rs.100
lakhs : Rs.1,50,000/-
- Works costing more than Rs.100 lakhs
Rs. 2, 00,000/-
One time EMD will also be Rs. 2 lakhs.
For SAS jobs and other smaller/ routine type of
jobs such as maintenance/ servicing etc., the maximum
value of EMD as well as one time EMD will
Rs.1,00,000/-.
EMD is to be collected in cash (as permissible under
Income Tax Act), Pay order or Demand Draft only .
Security Deposit: 10% of contract value. As per BHEL norms.
Submission of Tender: Tender duly sealed is to be submitted by
17/05/10, by 01:30PM in the tender room, Ground Floor, ADM
Building, BHEL, Bhopal.
Payment terms: Payment shall be made on per job basis after
completion of work every month against the running bill submitted
by you.
The job will be considered succsssfully completed only after it
passes stage test & is cleared by Q.C / R.D.S.O.
Material & Handling: Tools and consumables will be provided by
BHEL.
Safety: Safety of the worker deployed by you shall be entirely your
responsibility. You will have to produce medical Fitness Certificate
of each worker provided by you against this work order, on
demand by the representative of safety Officer / Chief Inspector of
Factory, Govt. of M.P.
Dispute: Dispute, if any shall be confined to judicial Court of
Bhopal only.
Penalty: A sum maximum up to 10% of the work Order value, will
be payable by you as compensation for incomplete job done, in
case you fail to do required work as directed by Executive of
TXM. The decision regarding imposing penalty by a Committee of
Executive of BHEL shall be final.
Statutory requirements: You shall be responsible for
fulfillment of all prevailing statutory requirements and
conditions mentioned in enquiry and attached general terms &
conditions & special conditions as may be necessary, and not
limited to only following (a) Factory Act 1948. (b) Provident Fund
1952 © Employee insurance Act 1952.
work is to be carried out which includes
a) Tig welding of D.C armatures .
b) Brazing work of ABB 6FRA, 6FXA, DMKT & Siemens stators.
The work also involves Loading/unloading of jobs which is to be
done by the party itself.
The above work should meet the requirement of the shop
executive/supervisor. The contractor shall supervise all operations
done by their employees. Party should have experience in doing
similar kind of work.
The above work shall be normally done in 1st & 2nd shift. Work
shall also be done in 3rd shift and on Sunday/Holidays as and
when required.
Price: Rate per job for every work(Tig welding of D.Carmatures,
Brazing work of ABB 6FRA, 6FXA, DMKT & Siemens
stators.)shall be quoted.In addition to the operators to
perform the operations, contractor will have to provide one
supervisor to supervise all operations. Party has to mention
total amount also.Total amount will be taken for L1
calculation (In case of discrepancy the value in words will be
considered).
Party should have experience in doing similar kind of work.
Period: Period of completion of work shall be from the date of
placement of order to 31/03/2011.
EMD: Earnest Money is to be paid by each tenderer to ensure
that The
tenderer does not refuse to execute the work after it
is awarded
to him. The rate of earnest money deposit shall be as
under:
- Works costing up to Rs. 2 lakhs
Nil
- Works costing more than Rs. 2 lakhs and up to Rs. 5 lakhs
: Rs.10, 000/-
- Works costing more than Rs. 5 lakhs and up to Rs. 10
lakhs : Rs.20,000/-
- Works costing more than Rs.10 lakhs and up to Rs. 20
lakhs : Rs.40,000/-
- Works costing more than Rs.20 lakhs and up to Rs. 30
lakhs : Rs.60,000/-
- Works costing more than Rs.30 lakhs and up to Rs. 50
lakhs : Rs1, 00,000/-
- Works costing more than Rs.50 lakhs and up to Rs.100
lakhs : Rs.1,50,000/-
- Works costing more than Rs.100 lakhs
Rs. 2, 00,000/-
One time EMD will also be Rs. 2 lakhs.
For SAS jobs and other smaller/ routine type of
jobs such as maintenance/ servicing etc., the maximum
value of EMD as well as one time EMD will
Rs.1,00,000/-.
EMD is to be collected in cash (as permissible under
Income Tax Act), Pay order or Demand Draft only .
Security Deposit: 10% of contract value. As per BHEL norms.
Submission of Tender: Tender duly sealed is to be submitted by
17/05/10, by 01:30PM in the tender room, Ground Floor, ADM
Building, BHEL, Bhopal.
Payment terms: Payment shall be made on per job basis after
completion of work every month against the running bill submitted
by you.
The job will be considered succsssfully completed only after it
passes stage test & is cleared by Q.C / R.D.S.O.
Material & Handling: Tools and consumables will be provided by
BHEL.
Safety: Safety of the worker deployed by you shall be entirely your
responsibility. You will have to produce medical Fitness Certificate
of each worker provided by you against this work order, on
demand by the representative of safety Officer / Chief Inspector of
Factory, Govt. of M.P.
Dispute: Dispute, if any shall be confined to judicial Court of
Bhopal only.
Penalty: A sum maximum up to 10% of the work Order value, will
be payable by you as compensation for incomplete job done, in
case you fail to do required work as directed by Executive of
TXM. The decision regarding imposing penalty by a Committee of
Executive of BHEL shall be final.
Statutory requirements: You shall be responsible for
fulfillment of all prevailing statutory requirements and
conditions mentioned in enquiry and attached general terms &
conditions & special conditions as may be necessary, and not
limited to only following (a) Factory Act 1948. (b) Provident Fund
1952 © Employee insurance Act 1952.