05-07-2010, 11:10 PM
1. Integrated approach through CAE for Design & Devlopment of a Cooling Fan used in a Hand-Grinding Machine.
2. Tensional analysis of Shaft.
3. FEA of Crankcase.
4. Bumper System Redesign for lower leg pedestrian Impact
5. Control Arm Weight Optimization.
6. Analysis of Ship Structures
7. Static Linear/Non Linear analysis of Dome Structure
8. Analysis and Design of Underground Storage Tanks of Polyethylene and Polymers.
9. Design and development of mounting bracket of Honda city car using CAE techniques.
10. Thermal Analysis of Railway Wagon Brake Shoe.
11. Design development of air intake manifold for four wheeler engine.
12. To Determine the Stress & Deformation of a Prototype Seat Belt Component that
13. is Subjected to a Tensile Load of 1000 lbf
14. Involutes gear tooth bending stress analysis.
15. Coupled finite element analysis of pressure vessel creep failure experiments
16. An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber Reinforced Plastics.
17. Failure analysis of a shock absorber piston produced by powder metallurgy processing.
18. Modeling Of Various Agro Machines And Standard Components Using Pro/Engineer.
19. Design and exploration of bumper systems using advanced cae techniquces.
20. Design & Structural analysis through cae of gear control box housing used for manual transmission in four wheeler.
21. Design and Analysis of Mini Bajaj Gearbox.
22. Design and Analysis of Snap Hook.
23. An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber Reinforced Plastics .
24. Structural and thermal analysis of gas turbine casing
25. DESIGN AND ANALYSIS OF A COMPOSITE BEAM FOR SIDE IMPACT PROTECTION OF A SEDAN .
26. ACTIVE TWIST OF MODEL ROTAR BLADES WITH D-SPAR DESIGN.
27. Design and analysis of piston 4s S.I engine.
28. OPTIMIZATION & ANALYSIS OF RICE MILL ROLLER.
29. Finite Element Analysis of a GearTooth Using Ansys & Stress Reduction by Stress Relief Hole.
30. Design and analysis of crank shaft 4s S.I engine.
31. Design and analysis of connecting rod 4s S.I engine.
32. Design and analysis of spindle with Spm (special purpose machine).
33. Design and buckling analysis of two post Screw auto lifter.
34. Structural analysis of six wheeler chassis.
2. Tensional analysis of Shaft.
3. FEA of Crankcase.
4. Bumper System Redesign for lower leg pedestrian Impact
5. Control Arm Weight Optimization.
6. Analysis of Ship Structures
7. Static Linear/Non Linear analysis of Dome Structure
8. Analysis and Design of Underground Storage Tanks of Polyethylene and Polymers.
9. Design and development of mounting bracket of Honda city car using CAE techniques.
10. Thermal Analysis of Railway Wagon Brake Shoe.
11. Design development of air intake manifold for four wheeler engine.
12. To Determine the Stress & Deformation of a Prototype Seat Belt Component that
13. is Subjected to a Tensile Load of 1000 lbf
14. Involutes gear tooth bending stress analysis.
15. Coupled finite element analysis of pressure vessel creep failure experiments
16. An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber Reinforced Plastics.
17. Failure analysis of a shock absorber piston produced by powder metallurgy processing.
18. Modeling Of Various Agro Machines And Standard Components Using Pro/Engineer.
19. Design and exploration of bumper systems using advanced cae techniquces.
20. Design & Structural analysis through cae of gear control box housing used for manual transmission in four wheeler.
21. Design and Analysis of Mini Bajaj Gearbox.
22. Design and Analysis of Snap Hook.
23. An Experimental Study on the Vibration Characteristics of the Rotor Blade with Fiber Reinforced Plastics .
24. Structural and thermal analysis of gas turbine casing
25. DESIGN AND ANALYSIS OF A COMPOSITE BEAM FOR SIDE IMPACT PROTECTION OF A SEDAN .
26. ACTIVE TWIST OF MODEL ROTAR BLADES WITH D-SPAR DESIGN.
27. Design and analysis of piston 4s S.I engine.
28. OPTIMIZATION & ANALYSIS OF RICE MILL ROLLER.
29. Finite Element Analysis of a GearTooth Using Ansys & Stress Reduction by Stress Relief Hole.
30. Design and analysis of crank shaft 4s S.I engine.
31. Design and analysis of connecting rod 4s S.I engine.
32. Design and analysis of spindle with Spm (special purpose machine).
33. Design and buckling analysis of two post Screw auto lifter.
34. Structural analysis of six wheeler chassis.