21-07-2012, 11:26 AM
ADVANCED ENGINE TECHNOLOGIES
ADVANCED ENGINE TECHNOLOGIES.docx (Size: 1.98 MB / Downloads: 49)
ABSTRACT
The unique ox2 engine has been hailed as the first breakthrough technology in internal combustion engine design since the introduction of the Otto-Four Cycle Engine. Preliminary studies have shown that ox2 will either meet or exceed governmental and environmental requirement.
In October 1993, the U.S government announced on world wide media that it was to heavily subsidize consortium acting under a developmental mandate which would within fifteen years at a budget of up to one trillion dollars, produce a new design configuration and prototypes to replace the existing internal combustion engines. The firm constituted under the consortium was named ‘ADVANCED ENGINE TECHNOLOGIES’ and the ox2 engine is its product. The engine contains 8 cylinders and is currently in the prototype testing stage.
Introduction to ‘ox2 engine’
The unique ox2 engine has been hailed as the first breakthrough technology in internal combustion engine design since the introduction of the Otto-Four Cycle Engine. Preliminary studies have shown that ox2 will either meet or exceed governmental and environmental requirements.
In October 1993, the U.S government announced on world wide media that it was to heavily subsidize a consortium acting under a developmental mandate which would within fifteen years at a budget of up to one trillion dollars, produce a new design configuration and prototypes to replace the existing internal combustion engines. The firm constituted under the consortium was named ‘ADVANCED ENGINE TECHNOLOGIES’ and the ox2 engine is its product. The engine contains 8 cylinders and is currently in the prototype testing stage.
Power stroke or Expansion stroke:
In this stroke, the spark plug ignites the compressed air- fuel mixture producing huge volume of gasses which expands. The resulting high pressure and temperature pushes the piston downwards doing the work. Both the ports remains closed during this stroke.
Working of the engine:
The ox2 engine consists of 8 cylinders which are placed in a circle. The cylinders are connected to a cylinder head which in turn is connected to the outer cylinder housing. The pistons which are moving inside the cylinders have a base support of a piston plate. There are two piston plates for this purpose which connects the alternate pistons. These two piston plates are called top and lower piston plates. The pistons are part of the piston plates. They house a constant velocity rolling bearing joint on their outer diameter/inner diameter to enable a frictionless transition from reciprocating motion to rotary motion. There is a cam track at the bottom which facilitates the reciprocatory motion of the piston inside the cylinder due to its unique design.