07-10-2016, 10:01 AM
1458132253-SoilandGroundwaterRemediation.docx (Size: 729.72 KB / Downloads: 7)
AOMS’ MTS (Multipoint Temperature Sensor) product leverages proven optical technology for premium temperature measurement in harsh environments. AOMS’ MTS system is a field ready end-to-end hardware/software solution for applications requiring small form factor, immunity to Electro-Magnetic Interference (EMI), and resistance to corrosion and moisture permeation. MTS enables the measurement of temperature at multiple locations along a cable that can be up to tens of kilometers long.
MTS Features
1. Immune to Environmental Noise
2. Insensitive to Moisture or Water Permeation
3. Resistant to Chemical Attacks
4. Multiple Sensors per Cable
5. Small Form Factor
6. Low Loss over Long Distances
7. Low Bending Loss
Multi-Parameter Sensing in Oil and Gas
1.
2.
3.
Global energy demand is estimated to double by 2050. According to the Annual Energy Outlook 2012 released by the U.S. Energy Information Administration (EIA), oil and gas wells produced 5634 million metric tons of greenhouse gas (GHG) in 2010. In Canada, thousands of oil wells are leaking unwanted greenhouse gases into the environment due to a number of technical and geological problems. Additionally, with the advent of new production technology that has enabled the recent explosive growth in shale gas extraction, the GHG emission and productivity and cost efficiency problems will multiply. In addition to wells, the oil and gas pipelines are exposed to Stress Corrosion Cracking (SCC) and wall thinning which result in harmful gas and liquid leakage. As a result, the oil and gas industry need to rely on downhole and pipeline monitoring systems to reduce these risks.
AOMS Fiber In Tube (FIT) sensor enables reliable monitoring of pressure and temperature in pipelines and downhole.
FIT Sensor Features
1. Simultaneous measurement of strain, pressure, deformation, and temperature
2. Multi-parameter quasi-distributed sensing
3. Low loss remote sensing
4. Low profile design – down to ¼” in diameter
5. No downhole electronics
6. Solid state sensor design – no o-ring and moving parts
7. Long term durability at extreme pressure and temperature
8. Low cost
9. Real time measurements
10. Customizable spatial and temporal resolution
11. Ingress protection rating up to IP67
FIT Sensor Specifications
Pressure range: (bar/PSI) 680/10,000
Pressure accuracy: (%FS) 0.3
Temperature range: (°C/°F) 300/570
Temperature accuracy: (°C/°F) 0.2/0.4
Smart Water Sensor
1.
2.
Real time monitoring of hydrologic conditions and water quality are of critical importance for sustainable development and management of water resources.
AOMS Technologies is developing all-in-one fiber optic sensing systems for distributed monitoring of pressure, temperature, and chemical contamination in ground and surface water. AOMS fiber optic cables integrate multiple sensors in a single strand of optical fiber that can run for several miles and can monitor multiple sensing points at the same time. AOMS Smart Water sensing system can stream data to water management softwares through standard data transmission protocols.