16-08-2014, 03:20 PM
The main object of this project undertaken is cutting of betel into regular shapes. One of the major problems in industry is to cut betel nut into various forms and by various methods. For this purpose two different machines are used in industries. In the above two machine, the first machine is used to cut the betel in two pieces and the second machine is used to cut the previous two pieces of betel nut into various small pieces. But the use of two different machines is not economical nad more time consuming.
The main object of this project undertaken is cutting of betel into regular shapes.
One of the major problems in industry is to cut betel nut into various forms and by various methods. For this purpose two different machines are used in industries.
In the above two machine, the first machine is used to cut the betel in two pieces and the second machine is used to cut the previous two pieces of betel nut into various small pieces. But the use of two different machines is not economical nad more time consuming.
Hence to overcome this problem, we have designed the machine which is used to cut betel in single stroke with required size. Therefore use of this betel-cutting machine increases the productivity at least running cost with least effort.
The betel nut is feed through hopper from the top of the machine, as the betel pass through series of cutter we can get the required cut by adjusting the position of cutter with the help of adjustable screw. On one end of cutter shaft gears are mounted whle the extreme lower right cutter shaft has the pulley, which is rotated by 'V' belt with the help of electric motor that in turns rotate the cutter