31-08-2016, 12:19 PM
1451720308-FinlReportChethanK.pdf (Size: 1.31 MB / Downloads: 7)
INTRODUCTION
1.1 INTRODUTION
In all civil engineering works, the most crucial is the reliability of the information
about the ground on which the civil engineering project will be founded. There are various
methods of obtaining site investigation information, in this project we will concentrate on
most widely used method, that involving Boring and Drilling.
1.1.1 IMPORTANCE OF SITE INVESTIGATION INFORMATION
We, the Engineers, all will agree that site investigation is a specialist operation.
Almost all site investigation is remotely carried out (we are testing grounds below from
surface!) and because of this, it is necessarily the most procedure oriented operation.
Therefore, for site investigation information to be meaningful, it requires strict adherence to
procedures and good practice. This simply translated means, adherence to Code of Practice
and Specifications. All Engineers fully agree with these statements. Millions or billions will
be committed to the project. It therefore makes engineering sense that site investigation must
only be carried out using suitable equipment and ancillaries and by trained persons under the
supervision of equally if not better trained supervisors.
All site investigation specifications for Site Investigation in use today in one way or another
emphasize workmanship supervision and have similar requirements namely:
1. Method of boring must be such that observations are possible and soil volume to be
tested remain undisturbed before being tested.
2. Boring to be carried out using Drill Rods with bits attached to be used for advancing
of bore holes
3. Judicial use of water
4. Testing requirements
5. References to Supervisor or similar implying competent supervision
6. References to Code of Practice and Specification, insiting on adherence to procedures
Geotechnical site investigation using wash boring and rotary drilling
Dept. of Civil Engineering, BKIT,Bhalki Page 2
1.2 COMPANY DETAILS
Aishwaryagiri construction private. Ltd. was established in 2010 September as civil
engineering consultancy, with the purpose of working with geotechnical site inspection and
testing of building materials. Company‟s portfolio includes a wide range of site investigation
and projects varied from small renovation to school building to construction of residential
building.
Managing director Vijay Kumar has worked with some of the innovative and site
investigation, tunnel lining and geotechnical engineer in Bangalore. Based on this diverse
portfolio and experience company can guarantee an excellent outcome of the project.
Company enjoy the technical, logical, engineering principles that reinforce engineering
profession, applying them creatively to help civil engineers and clients bridge the gap
between concept and reality, to meet our clients individual needs.
Company experience with providing feasibility assessment and in working with multi
disciplinary teams enables them to make a constructive contribution at an early stage in the
design of the project. When engineering input can often help to achieve a sophisticated
solution that is also financially beneficial. Company is always striving to find better ways to
tackle the challenges of each project.
Company Provides geotechnical site investigation and construction services for a
variety of private sector clients. The firm offers a wide range of engineering services.
Aishwaryagiri construction private Ltd possesses a unique combination of extensive technical
expertise as a site and laboratory consulting company with broad practical knowledge of
construction issues.
An engineering structure is an assembly of members or elements transferring the load
(or resisting external actions) and providing a form, space, and an enclosure and\or a cover to
serve the desired function. The geotechnical site investigation is a science and art of design
foundation intelligently, with economy and elegance.
The objective of site investigation is importance to the civil engineer for the
successful completion of any building project.
1. Safety
2. Durability
3. Economy
4. Feasibility, practicability and acceptability
Geotechnical site investigation using wash boring and rotary drilling
Dept. of Civil Engineering, BKIT,Bhalki Page 3
The company has distinct blend of diversified engineering experience that covers all
aspects and phase of site investigation and construction. Aishwaryagiri construction private
Ltd. is a small firm providing personalizes attention to each client. The company is
committed to engineering excellence, innovation and finding timely and cost effective
solutions.
Our company is specialist civil and geotechnical engineering consultancy with a
reputation for delivering high quality field investigation. Company‟s knowledge of traditional
and modern construction materials and techniques allows us to add real value in our work.
Coupled with their experience and ingenuity company is proud of their ability to develop
bespoke, cost effective engineering solution.
Our companies have a strong commitment to providing sustainable and energy
efficient field and laboratory test. To help achieve this company work closely with all
members of the geotechnical engineering team, contractor and clients in order to produce a
fully integrated field investigation and construction solution.
The main goal of the company is to provide top quality services to all their clients,
large or small. Aishwaryagiri construction private Ltd. has a multi discipline, well
experienced, and professional engineering staff with experience. The office managers and
administrative team also works diligently and efficiently complimenting. Aishwaryagiri
construction private Ltd main goals and visions. “To achieve top most quality in our work
with continuous improvement in all activities by using latest investigation technology and
implementing our management system”.
The mission of my company is highlighted below:
Guided by their vision, they shall provide quality services exceeding client‟s
expectations while adhering to the highest standards of technical and individual excellence
through continuous improvement training and innovation
Adding value to clients
Nurturing and promoting talents
Respecting employees intense efforts and contribution
Geotechnical site investigation using wash boring and rotary drilling
Dept. of Civil Engineering, BKIT,Bhalki Page 4
1.2.1 LOCATION
It is located in the most favorable place of Bangalore district. There is peaceful
environment and good working place for every engineer to accomplish the task given to him.
The company is KHB colony, Basaveshwara nagar, Bangalore.
1.2.2 OBJECTIVE
1. To offer comprehensive site investigation services, owners, developers and
contractors and have extensive experience with all types of any buildings.
2. To deliver sound, creative engineering solution within budget and on schedule.
3. To provide expertise in every facet of geotechnical consulting services.
4. To provide consistency to the project.
5. To quickly and efficiently respond to clients needs with enthusiasm.
6. Guidance to clients to mitigate the effects of earthquake during design stages or when
a problem is identified.
7. To provide simple solutions for the intricate engineering problems.
8. To create awareness about the importance of codal specifications and correct
engineering practice.
1.2.3 ORGANIZATION AND MANAGEMENT
In every organization, the most important asset is the people that play essential role in
the performance of the company‟s function and responsibilities. Thus Aishwaryagiri
construction private Ltd is fortunate to have highly qualified and experienced personnel.
Reciprocally, Aishwaryagiri construction private Ltd has aimed to provide its employee all
the basic necessities while performing their assigned tasks and at the same time equip them
through training and seminars to enhance their capabilities.
The company as organization and the employees because of the mutual benefits that
simultaneously being enjoyed by, has grown tremendously and has blazed a track record of
fulfilling its obligation and commitment both the customers and the community. They would
be like to be on the level where they should be. Having confidence in the organization, they
aim high. The teamwork that has been developed through the years of hard work has reaped a
harvest of opportunities and wealth. They will continue to improve and develop new concepts
both in management and technology.
Geotechnical site investigation using wash boring and rotary drilling
Dept. of Civil Engineering, BKIT,Bhalki Page 5
The firm is capable of furnishing well coordinating geotechnical and civil engineering
design services by utilizes its in house staff as well as its professional associates. All
engineering services carry the quality control assurance and guaranty of the company firm.
Aishwaryagiri construction private Ltd carried out any project by forming a dedicated
project team. Each team is headed by a senior geotechnical engineer and draftsmen enough to
complete the project in schedule. Engineer‟s teams are dynamically managed to
accommodate necessary and fluctuating workload and tights schedules. Flexible teaming
capability enables Aishwaryagiri construction private Ltd to undertake potential of taking
large and small project with the lowest overhead costs thus providing the best value to the
client.
1.2.4 CONSULTANCY TEAM
The team consists of panel of expert to delivers the services on time and according to
the. Aishwaryagiri construction private Ltd requirements. The teams provides detailed
attention to their. Aishwaryagiri construction private Ltd needs and committed to deliver
sound, creative engineering conveyed through clear concise documents within the budget and
on schedule for every projects. The team have qualification , experience and skill required to
handle any kind of structural difficulty.
1. Vijay Kumar., Director (M.Tech)
Mr. Vijay Kumar worked with a talented teams of professionals offering
Geotechnical engineering and foundation design services to builders. Mr.
Vijay Kumar is progressive in his knowledge of new and innovative products
and ideas and maintains hand on approach to projects. He inspire his team to
offer consistent and steady service to support the design professional in their
quest to satisfy their client.
2. Naveen K. (Civil engineer)
Mr. Naveen K. is project executive and integral part of our ongoing focus of
fostering excellent client relationship and company goal of providing the
highest quality of the foundation design project.
Geotechnical site investigation using wash boring and rotary drilling
Dept. of Civil Engineering, BKIT,Bhalki Page 6
3. Shreyas HR (Civil engineer)
Mr.Shreyas HR has significant experience in CAD software, and is thorough
in his preparation of structural drawing and adherence to building
specifications. In addition to drafting expertise, Mr. Shreyas HR shares a keen
sense of aesthetic with a background in foundation design.