28-09-2010, 07:17 PM
sir,
i would like to get thge full paper(PDF) and PPT of the topic MAGNETOHYDRODYNAMIC POWER GENERATION TECHNOLOGY (MHD)
28-09-2010, 07:17 PM
sir, i would like to get thge full paper(PDF) and PPT of the topic MAGNETOHYDRODYNAMIC POWER GENERATION TECHNOLOGY (MHD)
18-01-2011, 10:14 AM
its really funny to see seminar report and presentation of MAGNETOHYDRODYNAMIC POWER GENERATION TECHNOLOGY seeing into this threads
https://seminarproject.net/Thread-magnet...nology-mhd https://seminarproject.net/Thread-magnet...ic-systems
22-01-2011, 12:48 PM
i want more information about it
03-03-2011, 04:19 PM
MAGNETO HYDRO DYNAMIC POWER GENERATION.doc (Size: 656.5 KB / Downloads: 98) ABSTRACT: The electricity requirements of the world including India are increasing at alarming rate and the power demand has been running ahead of supply. It is also now widely recognized that the fossil fuels and other conventional resources, presently being used for generation of electrical energy, may not be either sufficient or suitable to keep pace with ever increasing demand of the electrical energy of the world. Also generation of electrical power by coal based steam power plants or nuclear power plants causes’ pollution. The recent severe energy crisis has forced the world to develop new and alternative methods of power generation. MAGNETO HYDRO DYNAMIC (MHD) power generation is a new unique method of power generation. INTRODUCTION: When an electrical conductor is moved so as to cut lines of magnetic induction, charged particles in the conductor experience a force in a direction mutually perpendicular to the B field and to the velocity of the conductor. The negative charges tend to move in one direction, and the positive charges in the opposite direction. This induced electric field, or motional emf, provides the basis for converting mechanical energy into electricalenergy. In conventional steam power plants, the heat released by the fuel is converted into rotational mechanical energy by means of a thermo cycle and the mechanical energy is then used to drive the electric generator. Thus two stages of energy conversion are involved in which the heat to mechanical energy conversion has inherently very low efficiency. Also, the rotating machine has its associated losses and maintenance problems. In MHD generation, electrical energy is directly generated from hot combustion gases produced by the combustion of fuel without moving parts. The conventional electrical machines are basically electro mechanical converters while an MHD generator is heat engine operating on a turbine cycle and transforming the internal energy of gas directly into electrical energy. PRINCIPLE OF WORKING OF AN MHD GENERATOR… The basic principle of MHD is just similar to dynamo except that the solid conductor of high electrical conductivity is replaced by a gas with comparatively low value of electrical conductivity. If the gas is heated to high temperature it gets converted into plasma and plasma is conductor of electricity. HOW AN MHD GENERATOR WORKS? In an MHD generator, electrically conducting gas at a very high temperature is passed at high velocity through a strong magnetic field at right angles to the direction of flow, there by generating electrical energy. The electrical energy is then collected from stationary electrodes placed on the opposite sides of the channel. The current so obtained is direct current which can be converted into ac by an inverter. Ionized gas can be produced by heating it to a high temperature. On heating of a gas, the outer electrons escape out from its atoms or molecules. The particles acquire an electric charge and the gases passes into the state of plasma. However to achieve thermal ionization of products of combustion of fossil fuels or inert gases extremely high temperatures are necessary. Air becomes highly ionized at temperatures of 5,0000 to 6,0000C. To have a reasonable value of electrical conductivity of gases at temperatures around 2,000 to 3,000 K by reasonable ionization, the gases are seeded with additives of easily ionizing materials (Alkali metals) such as Cesium or Potassium. The induced current are collected by suitably placed electrodes and simplest system would carry direct current to the external load.
21-03-2011, 12:40 PM
INTRODUCTION
It is well known that man had always been trying to fined something new to achieve a new aims 80% of total electricity produced in the world is hydral while remaining 20% is produced from nuclear, thermal, solar, Geothermal energy and from magneto hydro dynamic power generation. MHD power generation is a new system of electric power generation which is said to be of high efficiency and low pollution. In advanced countries MHD generator are widely used but in developing countries like India it is still under construction. This construction work is in progress at Tiruchirapalli in Tamilnadu unders joint efforts of BARC (Bhabha Atomic Research Centre), BHEL, Associated cement corporation and Russian technologists. As its name implies, magneto-hydro-dynamic (MHD) is concerned with the flow of conducting fluid in presence of magnetic and electric field. This fluid may be gas at elevated temperature or liquid metal like sodium or potassium. A MHD generator is a device for converting heat energy of fuel directly into electric energy without a conventional electric generator. The basic difference between conventional generator and MHD generator is in the nature of conductor. PRINCIPLE OF MHD POWER GENERATION The principle of MHD generation is simple, discovered by faraday when an electric conductor moves across a magnetic field, a emf. Is induced in it, which produced an electric current. This is the principle of the conventional generator also, where the conductors consists of copper strips. In MHD generator the solid conductors are replaced by a gaseous conductor; i.e. an ionized gas. If such gas is passed at high velocity through a powerful magnetic field, i.e. suppose we have a charged particle (having charge q) moving at a high velocity ‘V’ towards right and a perpendicular magnetic field is applied. A magnetic force ‘F’ acts on the charged particle. Show in fig. A Positively charged particles as forced upward and negatively charged particle is forced downward. The positive ions would be accelerated towards the upper plate P, and negative ions would be accelerated towards the plate P2 . If the P1 and P2 are externally connected through a resistance, a current would flow through the resistance. Thus gas energy directly converted into electrical energy. This is the principle of MHD generator. A MHD conversion is known as direct energy conversion because it produced electricity directly from heat source without the necessity of the additional stage of steam generation as in a steam power plant.
01-02-2012, 11:10 AM
to get information about the topic Magnetohydrodynamic power generation technology full report ppt, and related topics refer the link bellow
https://seminarproject.net/Thread-magnet...nology-mhd https://seminarproject.net/Thread-magnet...-mhd--1031 https://seminarproject.net/Thread-magnet...mhd?page=2
06-03-2012, 01:13 AM
MAGNETOHYDRODYNAMIC POWER GENERATION
06-03-2012, 09:42 AM
to get information about the topic " MAGNETOHYDRODYNAMIC POWER GENERATION TECHNOLOGY " full report ppt and related topic refer the link bellow
https://seminarproject.net/Thread-magnet...nology-mhd https://seminarproject.net/Thread-magnet...-mhd--1031 https://seminarproject.net/Thread-magnet...nology-mhd https://seminarproject.net/Thread-magnet...mhd?page=2 https://seminarproject.net/Thread-magnet...mhd?page=3 https://seminarproject.net/Thread-magnet...031?page=4 https://seminarproject.net/Thread-magnet...ode=linear |
|