01-06-2012, 10:29 AM
MANUAL STEERING GEARS
MANUAL STEERING GEARS.docx (Size: 150.17 KB / Downloads: 35)
1. Re - Circulating Ball Type Steering Gears
Fork type
Open type / Close type
Sector type
Constant ratio & variable ratio with single or double lever
2. Rack & Pinion Type Steering Gears
For all passenger cars
Available with
Single end take offm
Double end take off
STEERING LINKAGES
3.Tie Rod Assemblies
Ball joint with greased nipple (metallic bearing / cups)
Ball head sizes 24, 26, 28.5, 30, 35 & 40 dia
Greased for life Ball joint (metallic bearing / cups)
Ball head sizes 26, 30, 35 & 40 dia
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 22, 25, 25.4, 28 & 30 dia
For CV / UV & Farm Tractors
4.Drag Link Assemblies
Ball joint with greased nipple (metallic bearing / cups)
Ball head sizes 24, 26, 28.5, 30, 35 & 40 dia
Greased for life Ball joint (metallic bearing / cups)
Ball head sizes 26, 30, 35 & 40 dia
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 22, 25, 25.4, 28 & 30 dia
For CV / UV & Farm Tractors
5.Center Link Assemblies
Ball joint with greased nipple (metallic bearing / cups)
(Two types: Serviceable & Non serviceable)
Ball head size 26 dia
Greased for life Ball joint (plastic bearing / cups)
Ball head size 25.4 dia For Utility Vehicles
6.Gear Shift Ball Joints
Ball joint with greased nipple (metallic bearing / cups)
Ball head size 24 dia
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 19 & 22 dia For Commercial Vehicles
7.Outer Ball Joints
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 20, 22, 25, 25.4 & 28 dia
For Passenger Cars & Utility Vehicles
8.Inner Ball Joints
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 22, 24, 25 & 28 dia
For Passenger Cars & Utility Vehicles
SUSPENSION COMPONENTS
1.Lower Control Arms
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 22 & 25.4 dia For passenger car with
Mcphersion strut type suspension
2.Suspension Ball Joints (Lower & Upper)
With cylindrical socket housing for press fitting &
Flange socket housing for bolted assembly
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 25.4, 27, 30, 35 & 38 dia For
Passenger Cars & Utility Vehicles
3.Axle Ball Joints
With cylindrical socket housing for press fitting
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 32 & 38 dia For Utility Vehicles
4.Stabilizer link Ball Joints
Greased for life Ball joint (plastic bearing / cups)
Ball head sizes 16 & 19 dia For Passenger Cars &
Utility Vehicles
HYDRAULIC PRODUCTS
1. Hydrostatic steering for Farm tractors and off highway machines
Hydraulic cylinders
Steering cylinders - From 35 bore
TESTING & VALIDATON
The testing capabilities at RML reflect the company's commitment to deliver products
That bring with them a lifetime of safe, reliable performance
Independent testing facilities for each product division
Simulating of demanding and adverse conditions
Complete design validation tests
TESTS FOR STEERING GEARS:
Steering gears endurance test
Input torque test
Impact test
Rack and pinion endurance test
TESTS FOR STEERING LINKAGE & SUSPENSION LINKAGES:
Ball joint endurance test
Ball joint fatigue test
Ball joint performance (axial & radial end lift) test
Linkage buckling test
Dust seal muddy water test
Environmental Integrity test
High pressure car wash test
TEST FOR HYDRAULICS:
‘End of line’ performance testing
Endurance testing