13-10-2014, 12:48 PM
Abstracts: Abrasive jet machine is specially made for the purpose of it Utilization to remove the material from the w/p which is very brittle & Make a hole or any design on it. And at very high accuracy. The material removal is done due to EROSION. High velocity Flow of abrasive material & compressed air through nozzle strike the w/p Any removal the material from it. The rate of material from it . The rate of material (MRR) is very slow but the accuracy is very higher. The cost of machine is very low & maintenance is very low. The material of nozzle is very tough & Strengthens is very high. So tungsten carbide . high speed steel etc. are used. The future of this material is very bright due to in this machine There is no electricity is used only with compressed air the work is done.