07-11-2014, 04:30 PM
Abstracts: Rotomoulding machine works on basic principle of centrifugal force which is generated within mould cylinder. The application of Rotomoulding machine is for producing hollow parts. Some amount of charged poured in cylinder and heated up continuously while rotation of cylinder also made rotated. Due to heating up material and rotation of cylinder material become liquid forms and material is spread in the cylinder wall. This concept we saw in technical event in Ahmedabad L.D. college of engineering 2012. In that event we saw this concept but they uses heated charge in mould. We utilize burner for heating purpose by using burner we can reduce the production timing and stress free products. By adding some extra features like the pressure blowing and rotational bearing design changes we can save large amount of time in this procedure. So our goal is to make the cycle stress free and reduce the total making time of the product. Hence the cost and time efficiency will be good as purposed by us. For this we will use the journal bearing in our design and we will use different material for moulding and conduct various test on that material and analyze the result for the final cycle time. These project works gives the Introduction, Design & Development purpose information About the Rock & Roll Rotomoulding Machine for making hollow parts.