The power transmission for inclined axes is with the aid of crossed helical gears or helical gears or hypoid gears in a machine, but the manufacture of these gears is very complex, the loss of power in the gears due to the sliding movement and the orientations of the Axis is very limited, so the need for a better system arises. No-gear power transmission for bias shafts that reduce losses, cost and save time and space. This system allows the change in orientation of the axes during the movement which is very interesting and fascinating about this mechanism. In this transmission system no. The pins or links used must be odd 3,5,7,9 ... The pins or links are fixed in the holes drilled at both ends of the shaft because the movement is transferred. The work of this arrangement is very smooth and to work effectively with a minimum amount of power loss, which is skillful and is having some precision in power transmission at right angles without any kind of gears being manufactured.
Gearless transmission arrangement introduced used for bias shafts. The centers of any hole with two holes or links should not be on that line representing the diameter of the shaft. If more pins or links used movement will be smoother, but not increase. Of pins or links not at the expense of the resistance of the shaft. The pins or links are fixed (they may be temporary permanent) in the holes drilled at both ends of the shaft because the movement is transferred. The dimensions of the pegs or the links and the angle of the pegs are given with very precision, very precise perforations. Proposed arrangement used for tilting axes at any angle and if there is a need we can change the angle between axes during the movement or during intermittent movement with any profile of trees that have rotation movement along their own axis. The work of this arrangement is very smooth and very effective use with a minimum amount of energy losses.