23-05-2012, 04:19 PM
Nokia 5233-wireless device
Nokia 5233 User Guide.pdf (Size: 1.33 MB / Downloads: 260)
Update software using your PC
Nokia Software Updater is a PC application that enables you to update your device
software. To update your device software, you need a compatible PC, broadband
internet access, and a compatible USB data cable to connect your device to the PC.
To get more information and to download the Nokia Software Updater application,
go to www.nokiasoftwareupdate.
Settings
Your device normally has MMS, GPRS, streaming, and mobile internet
settings
automatically configured in the device, based on your network service provider
information. You may have settings from your service providers already installed in
your device, or you may receive or request the settings from the network service
providers as a special message.
Access codes
If you forget any of the access codes, contact your service provider.
● Personal identification number (PIN) code — This code protects your SIM card
against unauthorised use. The PIN code (4 - 8 digits) is usually supplied with the
SIM card. After three consecutive incorrect PIN code entries, the code is blocked,
and you need the PUK code to unblock it.
● PIN2 code — This code (4 - 8 digits) is supplied with some SIM cards, and is
required to access some functions in your device.
● Lock code (also known as security code) — The lock code helps you to protect
your device against unauthorised use. The preset code is 12345. You can create
and change the code, and set the device to request the code. Keep the new code
secret and in a safe place separate from your device. If you forget the code and
your device is locked, your device will require service. Additional charges may
Insert the battery
Always switch the device off and disconnect the charger before removing the
battery.
1. Remove the back cover.
2. Insert the battery.
3. To replace the cover, direct the top locking catches
toward their slots, and press down until the cover
locks into place.
Insert the memory card
Use only compatible microSD and microSDHC cards approved by Nokia for use with
this device. Nokia uses approved industry standards for memory cards, but some
brands may not be fully compatible with this device. Incompatible cards may
damage the card and the device and corrupt data stored on the card.
1. Open the cover of the memory card slot.
2. Insert a compatible memory card in the memory card slot. Make sure the
contact area on the card is facing up. Push
the card in. You can hear a click when the
card locks into place.
Bluetooth connectivity
About Bluetooth connectivity
With Bluetooth connectivity, you can make a wireless connection to other
compatible devices, such as mobile devices, computers, headsets, and car kits.
You can use the connection to send images, video and sound clips, and notes,
transfer files from your compatible PC, and print images with a compatible printer.
Since devices with Bluetooth wireless technology communicate using radio waves,
they do not need to be in direct line-of-sight. However, they must be within 10
metres (33 feet) of each other, although the connection may be subject to
interference from obstructions such as walls or from other electronic devices.
This device is compliant with Bluetooth Specification 2.0 + EDR supporting the
following profiles: advanced audio distribution, audio/video remote control, basic
imaging, device identification, dial-up networking, file transfer, generic audio/
video distribution, hands-free, headset, object push, phone book access, SIM access,
and stereo audio streaming. To ensure interoperability between other devices
supporting Bluetooth technology, use Nokia approved accessories for this model