28-08-2017, 12:39 PM
Until the last few decades, one million kilometers of cables are tangled in the air across the country. But at present it is placed in the subsoil, which is larger than an earlier method. Because underground cables are not affected by adverse weather conditions such as pollution, heavy rains, snow and storm, etc. But when a problem occurs in the cable, it is very difficult to find the exact location of the fault due to not knowing the exact location of the cable. Day by day, the world is being digitized so the project aims to find the location of the fault in digital form. When fault occurs, the repair process associated with that particular cable is very difficult. Cable breakdown occurs mainly due to many reasons. They are: inconsistent, any defect, cable weakness, insulation failure and breakage of the conductor. To overcome this problem, here is a project to know underground cable fault distance locator, used to find fault location for underground cable.
Underground Cable Fault Distance Locator
Before attempting to find underground cable failures in the direct primary blind cable, it is essential to know where the cable is located and which direction it is taking. If the fault occurs on the secondary cable, then knowing the exact route is even more critical. Since it is extremely difficult to find a cable fault without knowing where the cable is, it makes sense to master the location and tracking of the cable before starting the troubleshooting process.
The success of fault tracking and the location of an underground cable depends primarily on the skill, knowledge and experience of that person. Although cable tracing may be an intricate job, it is likely to become even more complex as more underground facilities are installed. It is so important to understand how the equipment works.
Underground Cable Fault Distance Locator
Before attempting to find underground cable failures in the direct primary blind cable, it is essential to know where the cable is located and which direction it is taking. If the fault occurs on the secondary cable, then knowing the exact route is even more critical. Since it is extremely difficult to find a cable fault without knowing where the cable is, it makes sense to master the location and tracking of the cable before starting the troubleshooting process.
The success of fault tracking and the location of an underground cable depends primarily on the skill, knowledge and experience of that person. Although cable tracing may be an intricate job, it is likely to become even more complex as more underground facilities are installed. It is so important to understand how the equipment works.