06-10-2017, 09:46 AM
Technological advancement and its incorporation are playing an important role in human life. At present, demand for electric power for domestic, commercial and industrial loads is increasing. In addition, the management of the electric power distribution system is becoming more complex. Bluetooth-based fault detection is a newly developed concept in detecting power system failures. This is a part of the smart grid. The system is designed to detect the transmission line failure for the user to easily recognize the current condition of the distribution line. The ultimate goal is to continuously monitor the status of the distribution line and, therefore, protect the failure of the distribution line due to restrictions such as overvoltage, undervoltage, failure SLG, DLG. If any of these occur then a user can easily detect the fault.
The main function of the protection system is to clean power system faults at high speed to ensure safety, minimize equipment damage and maintain stability of the power system. Protection of power systems requires an understanding of system failures, their detection and secure isolation of the defective device. By taking an inventory of all essential electrical loads and conducting a basic assessment of the electrical load, we have gained an idea of the amount of energy our system needs to produce. We are also aware of fluctuating energy situations as well which means what minimum / maximum voltage we are receiving from the A.C power supply. When doing this project we would be using microcontroller concepts, Bluetooth module and Android application.
The main function of the protection system is to clean power system faults at high speed to ensure safety, minimize equipment damage and maintain stability of the power system. Protection of power systems requires an understanding of system failures, their detection and secure isolation of the defective device. By taking an inventory of all essential electrical loads and conducting a basic assessment of the electrical load, we have gained an idea of the amount of energy our system needs to produce. We are also aware of fluctuating energy situations as well which means what minimum / maximum voltage we are receiving from the A.C power supply. When doing this project we would be using microcontroller concepts, Bluetooth module and Android application.