23-12-2010, 02:54 PM
Prepared by:
D. Siva Sumanth
K. N. V. Subrahmanyam
J. Mahesh
G. Srikanth
AUTOMATIC RAILWAY GATE CONTROL.pptx (Size: 293.44 KB / Downloads: 283)
OBJECTIVE
To alert and save the people from the train accidents at the unmanned railway gates.
To restrict the train accidents by introducing an application of track switching.
This project is developed in order to help the INDIAN RAILWAYS in making its present working system a better one, by eliminating some of the loopholes existing in it.
BLOCK DIAGRAM
Stepper motor for track switching
WORKING
When the train is behind 5km the counter will tell the micro controller to send the RF packet and stepper motor will close the gate by rotating clockwise and glows red signal light.
When the train crosses the gate then the counter automatically opens the gate by rotating the motor in anti-clockwise direction.
We can use the same counter to detect two trains coming in the same track in opposite direction and with the help of stepper motor we could rotate the gear to switch the track.
EXAMPLE OF AN AUTOMATIC RAILWAY GATE
AXLE COUNTERS
STEPPER MOTOR
ADVANTAGES
There is no time lag to operate the device.
Accuracy.
This can be further implemented to have control room to regulate the working of the system. Thus becomes the user friendliness.
This circuit can be expanded and used in a station with any number of platforms as per the usage.
TOOLS
HARDWARE:-
MICRO CONTROLLER
AXLE COUNTERS
STEPPER MOTOR
SOFTWARE:-
KEIL SOFTWARE