28-08-2014, 11:22 AM
IN this project of ”INTERNETWORK CONNECTIVITY” ,is the combination of INTERNET and INTRANET. According to CISCO it is a internetwork connectivity. Routing is the process by which an item gets from one location to another. In networking, a router is the device used to route traffic. Routers can forward packets over static routes or dynamic routes, based on the router configuration. Static routes can be important if the Cisco IOS software cannot build a route to a particular destination. Static routes are also useful for specifying a “gateway of last resort” to which all UN routable packets will be sent. A default route is a special type of static route used for situations when the route from a source to a destination is not known or when it is unfeasible for the routing table to store sufficient information about the route Static Routes:-This is a manually configured path that specifies how the router will get to a certain point using a certain path. Summary static routes:-This is several static routes that have been condensed into a single static route